Table of Contents
Advertisement
Profile Name: enter a name that you wish to assign to the
profile.
Homepage URL: enter the address of the WAP homepage of
your service provider.
Bearer: select the network bearer type for data transmission,
either GPRS or DATA.
Proxy Setting: enter the IP address of the proxy server.
User Name: enter the user ID required to connect to the
network.
Password: enter the password required to connect to the
network.
APN: enter the access point name used for the address of the
network.
Proxy Status: activate or deactivate the proxy server.
Primary DNS: enter the primary DNS (Domain Name System)
address.
Secondary DNS: enter the secondary DNS address.
4. When you have finished, press the
Time & Date
You can change the settings for the time and date display.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings and highlight Time & Date. Press the
Select soft key or the
3. Select a menu and then change the setting. If the menu
has submenus, repeat as necessary.
4. When you have finished, press the
key.
Section 8: Changing Your Settings
Time & Date
key.
key.
117
Advertisement
Table of Contents
