Steps
1. Insert the ODD into the ODD slot.
2. Replace the two (M2x2) screws to secure the optical-drive carrier to the chassis.
3. Connect the data and power cables to the optical drive.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Expansion card
Removing the expansion card
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the expansion card and provide a visual representation of the removal procedure.
62
Removing and installing Customer Replaceable Units (CRUs)
After working inside your
Before working inside your
computer.
computer.