Table of Contents
Advertisement
Table 28. Antenna-cable color scheme
Connectors on the
wireless card
Main
Auxiliary
2. Align the notch on the wireless card with the tab on the wireless-card slot on the system board.
3. Slide and insert the wireless card at an angle into the wireless-card slot on the system board.
4. Adhere the wireless card to the adhesive pad.
5. Align the screw hole on the wireless-card bracket to the screw hole on the wireless card and system board.
6. Replace the screw (M2x3.5) that secures the wireless-card bracket to the wireless card and system board.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Hard drive
2.5 inch hard drive
Removing the 2.5-inch hard drive assembly
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the 2.5-inch hard drive assembly and provide a visual representation of the removal
procedure.
54
Removing and installing Customer Replaceable Units (CRUs)
Antenna-cable color
White
Black
After working inside your
Before working inside your
Silkscreen marking
MAIN
AUX
computer.
computer.
△ (white triangle)
▲ (black triangle)
Advertisement
Table of Contents
