Landscape Forms Hawthorne Installation Manual

Hawthorne
Path Light
Installation Guide
Surface Mount
Included hardware
1x – Lightpole 4x – Cabinet
1x – Cabinet
assembly cover
dome cover
Tools Required
• Safety glasses
• Screwdrivers
• Wiring tools and connectors
• Anchoring hardware – (4) Ø3/8 (maximum) x 3-1/2" length stainless steel anchors.
Landscape Forms recommends Power bolts or drop-in wedge anchors
• Hammer drill
• 3/16" hex key
LIGHTING LAYOUT RECOMMENDATIONS:
Refer to the Product Data Sheet
WARNING!: LED cartridge and driver are not rated for connection or disconnection
while energized. Doing so may damage LEDs and will void the warranty. Disconnect
incoming power before making or breaking any electrical connections.
1x – Cabinet
1x – LED
dome
driver
retainer bar
1x – anchor
template
4x – Cabinet
cover screw
Fig. 1 – Minimum footing recommendation
Fig. 2 – Minimum concrete slab size
ASSEMBLE WITH CARE! Pangard II Polyester Powdercoat is a strong, long-lasting finish. To protect
this finish during assembly, place unwrapped powdercoated parts on packaging foam or other non-
marring surface. Do not place or slide powdercoated parts on concrete or other hard or textured
surface – this will damage the finish causing rust to occur. Use touch-up paint on any gouges in the
finish caused by assembly tools.
Date: April 05, 2023
www.landscapeforms.com Ph: 800.521.2546
Fig. 3 – Recommended setback
from sidewalk
Fig. 4 – Bottom view
Fig. 5 – Base plate section view
Page 1 of 2