ELEQ TQ105 Installation Manual

Technical Specifications
Technical Specifications
Technical Specifications
Safety and environmental conditions
Safety and environmental conditions
CE marking LV directive 2014/35/EU
Safety and environmental conditions CE marking LV directive 2014/35/EU
RoHS directive (EU) 2015/863
RoHS directive (EU) 2015/863
CE marking LV directive 2014/35/EU
Standard EN 61010-2-032:2012
Standard EN 61010-2-032:2012
RoHS directive (EU) 2015/863
WEEE directive 2012/19/EU
WEEE directive 2012/19/EU
Standard EN 61010-2-032:2012
WEEE directive 2012/19/EU
This product is designed to be safe under the following This product is designed to be safe under the following
conditions:
conditions:
This product is designed to be safe under the following
conditions:
Location Indoor use
Location Indoor use
Altitude Up to 2000m
Altitude Up to 2000m
Location Indoor use
Ambient temperature Ambient temperature -40°C .. +60°C -40°C .. +60°C
Altitude Up to 2000m
Storage temperature -20°C .. +70°C
Storage temperature -20°C .. +70°C
Ambient temperature -40°C .. +60°C
Relative humidity 5% .. 85%, non condensing
Relative humidity 5% .. 85%, non condensing
Storage temperature -20°C .. +70°C
Pollution degree 2
Pollution degree 2
Relative humidity 5% .. 85%, non condensing
Degree of protection Degree of protection IP20 IP20
Pollution degree 2
Degree of protection IP20
The TQ is only suitable for insulated primary conductors.
The TQ is only suitable for insulated primary conductors.
The TQ is only suitable for insulated primary conductors.
Specifications
Specifications
Standard
Standard
Specifications
Rated short-time thermal current (Ith)
Rated short-time thermal current (Ith)
Standard
Rated dynamic current (Idyn)
Rated dynamic current (Idyn)
Rated short-time thermal current (Ith)
Rated continuous thermal current (Icth)
Rated continuous thermal current (Icth)
Rated dynamic current (Idyn)
Rated insulation level
Rated insulation level
Rated continuous thermal current (Icth)
Rated frequency
Rated frequency
Rated insulation level
Class of insulation
Class of insulation
Rated frequency
Material (housing)
Material (housing)
Class of insulation
Material (housing)
Specifications per type
Specifications per type
TQ105 TQ105
TQ105 TQ105
Specifications per type
no filling 1 filling
no filling 1 filling 2 fillings
TQ105 TQ105
Suitable
Suitable
ø 31mm ø 51mm
ø 31mm ø 51mm ø 71mm
no filling 1 filling
for cable
for cable
Suitable
ø 31mm ø 51mm
for cable
Please be aware, product liability, fulfilment to requirements and
Please be aware, product liability, fulfilment to requirements and
warranty are all expired when modifications on the product are made.
warranty are all expired when modifications on the product are made.
Printing and typographical reserved.
Please be aware, product liability, fulfilment to requirements and Printing and typographical reserved.
warranty are all expired when modifications on the product are made.
ELEQ reserves the right to carry out modifications on its products, in
Printing and typographical reserved. ELEQ reserves the right to carry out modifications on its products, in
order to improve them, without prior notice.
order to improve them, without prior notice.
ELEQ reserves the right to carry out modifications on its products, in
Safety instruction
Safety instruction
order to improve them, without prior notice.
All activities for installation, commissioning and maintenance
All activities for installation, commissioning and maintenance
Safety instruction
of this current transformer must be performed by qualified of this current transformer must be performed by qualified
All activities for installation, commissioning and maintenance personnel that have the knowledge of applicable safety
personnel that have the knowledge of applicable safety
of this current transformer must be performed by qualified precautions. This guide assumes that the reader of this
precautions. This guide assumes that the reader of this
personnel that have the knowledge of applicable safety document has sufficient electro-technical knowledge to
document has sufficient electro-technical knowledge to
precautions. This guide assumes that the reader of this understand the content of this document. understand the content of this document.
document has sufficient electro-technical knowledge to
understand the content of this document.
General
General
General
The TQ split-core is a current transformer (CT) and can only
The TQ split-core is a current transformer (CT) and can only
be used measuring electrical alternating currents. The TQ is
be used measuring electrical alternating currents. The TQ is The TQ split-core is a current transformer (CT) and can only
suitable only for mounting on insulated primary conductors in
suitable only for mounting on insulated primary conductors in be used measuring electrical alternating currents. The TQ is
a weather protected and dry location.
a weather protected and dry location.
suitable only for mounting on insulated primary conductors in
a weather protected and dry location.
Explanation of symbols
Explanation of symbols
Explanation of symbols
IEC 61869-2:2012
IEC 61869-2:2012
60 x Ipr / 1s
60 x Ipr / 1s
IEC 61869-2:2012
2,5 x Ith
2,5 x Ith
60 x Ipr / 1s
100%
100%
2,5 x Ith
0,72/3/-kV
0,72/3/-kV
100%
50/60Hz
50/60Hz
0,72/3/-kV
E (120°C)
E (120°C)
50/60Hz
PC,UL94:V2
PC,UL94:V2
E (120°C)
PC,UL94:V2
TQ105 TQ105
TQ105 TQ105
2 fillings 3 fillings
3 fillings
TQ105 TQ105
ø 71mm ø 91mm
ø 91mm
2 fillings 3 fillings
ø 71mm ø 91mm
ELEQ b.v.
Tukseweg 130, 8331 LH Steenwijk, The Netherlands
+31 (0) 521 533 333
This product is designed according
This product is designed according
EN 61010-2-032:2012 standards and therefore this
EN 61010-2-032:2012 standards and therefore this
This product is designed according
product meets the requirements of the Low Voltage
product meets the requirements of the Low Voltage
EN 61010-2-032:2012 standards and therefore this
Directive 2014/35/EU.
Directive 2014/35/EU.
product meets the requirements of the Low Voltage
Directive 2014/35/EU.
Read the installation guide before mounting the
Read the installation guide before mounting the
product. Unprofessional work activities on electrical
product. Unprofessional work activities on electrical
Read the installation guide before mounting the
installations may result in a threat of danger to the life
installations may result in a threat of danger to the life
product. Unprofessional work activities on electrical
and health of human beings and livestock! and health of human beings and livestock!
installations may result in a threat of danger to the life
and health of human beings and livestock!
Under no circumstances the secondary circuit of the
Under no circumstances the secondary circuit of the
CT may be opened when the CT is closed and
CT may be opened when the CT is closed and
Under no circumstances the secondary circuit of the
current is flowing in the primary circuit. High voltages
current is flowing in the primary circuit. High voltages
CT may be opened when the CT is closed and
may appear on the secondary leads when this circuit
may appear on the secondary leads when this circuit
current is flowing in the primary circuit. High voltages
is left open.
is left open.
may appear on the secondary leads when this circuit
is left open.
RoHS Directive (EU) 2015/863 RoHS Directive (EU) 2015/863
ELEQ states that they only uses qualified components
ELEQ states that they only uses qualified components
RoHS Directive (EU) 2015/863
in their products from manufacturers,
in their products from manufacturers,
ELEQ states that they only uses qualified components
specifications meet or exceed the requirements of the
specifications meet or exceed the requirements of the
in their products from manufacturers,
European Directive for the Restriction of use of
European Directive for the Restriction of use of
specifications meet or exceed the requirements of the
certain Hazardous Substances.
certain Hazardous Substances.
European Directive for the Restriction of use of
certain Hazardous Substances.
WEEE Directive 2012/19/EU WEEE Directive 2012/19/EU
The 'crossed out wheeled bin' symbol indicates that
The 'crossed out wheeled bin' symbol indicates that
WEEE Directive 2012/19/EU
the equipment should not be disposed as unsorted
the equipment should not be disposed as unsorted
The 'crossed out wheeled bin' symbol indicates that municipal waste. Contact a qualified recycler for
municipal waste. Contact a qualified recycler for
the equipment should not be disposed as unsorted disposal.
disposal.
municipal waste. Contact a qualified recycler for
disposal.
84139 / EN2306
84139 / EN2306
info@eleq.com www.eleq.com
84139 / EN2306
84139 / EN2306
TQ Split-Core Current Transformer
TQ Split-Core Current Transformer
to the
to the
TQ Split-Core Current Transformer
to the Installation Guide
Installation Guide
Installation Guide
whose
whose
whose
TQ105 (4Q10xxx)
TQ105 (4Q10xxx)
TQ105 (4Q10xxx)
Read this installation guide before installing the product
Read this installation guide before installing the product
Read this installation guide before installing the product
ELEQ b.v.
Tukseweg 130, 8331 LH Steenwijk, The Netherlands
+31 (0) 521 533 333 info@eleq.com www.eleq.com