ELEQ TQ30 Installation Manual

Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Safety and environmental conditions
Safety and environmental conditions
Safety and environmental conditions
CE marking LV directive 2014/35/EU
CE marking LV directive 2014/35/EU
Safety and environmental conditions CE marking LV directive 2014/35/EU RoHS directive (EU) 2015/863
RoHS directive (EU) 2015/863
RoHS directive (EU) 2015/863
CE marking LV directive 2014/35/EU
Standard EN 61010-2-032:2012
Standard EN 61010-2-032:2012
Standard EN 61010-2-032:2012
WEEE directive 2012/19/EU RoHS directive (EU) 2015/863
WEEE directive 2012/19/EU
WEEE directive 2012/19/EU
Standard EN 61010-2-032:2012
This product is designed to be safe under the following WEEE directive 2012/19/EU
This product is designed to be safe under the following This product is designed to be safe under the following
conditions:
conditions:
conditions:
This product is designed to be safe under the following
conditions:
Location Indoor use
Location Indoor use
Location Indoor use
Altitude Up to 2000m
Altitude Up to 2000m
Altitude Up to 2000m
Location Indoor use
Ambient temperature -10°C .. +55°C
Ambient temperature Ambient temperature -10°C .. +55°C -10°C .. +55°C
Altitude Storage temperature -20°C .. +70°C Up to 2000m
Storage temperature -20°C .. +70°C
Storage temperature -20°C .. +70°C
Relative humidity Ambient temperature -10°C .. +55°C 5% .. 85%, non condensing
Relative humidity 5% .. 85%, non condensing
Relative humidity 5% .. 85%, non condensing
Pollution degree Storage temperature -20°C .. +70°C 2
Pollution degree 2
Pollution degree 2
Degree of protection Relative humidity IP20 5% .. 85%, non condensing
Degree of protection Degree of protection IP20 IP20
Pollution degree 2
Degree of protection IP20
The TQ is only suitable for insulated primary conductors.
The TQ is only suitable for insulated primary conductors.
The TQ is only suitable for insulated primary conductors.
The TQ is only suitable for insulated primary conductors. Specifications
Specifications
Specifications
Standard
Standard
Standard
Specifications
Rated short-time thermal current (Ith)
Rated short-time thermal current (Ith)
Rated short-time thermal current (Ith)
Rated dynamic current (Idyn) Standard
Rated dynamic current (Idyn)
Rated dynamic current (Idyn)
Rated short-time thermal current (Ith)
Rated continuous thermal current (Icth)
Rated continuous thermal current (Icth)
Rated continuous thermal current (Icth)
Rated dynamic current (Idyn) Rated insulation level
Rated insulation level
Rated insulation level
Rated frequency Rated continuous thermal current (Icth)
Rated frequency
Rated frequency
Class of insulation Rated insulation level
Class of insulation
Class of insulation
Rated frequency Material (housing)
Material (housing)
Material (housing)
Class of insulation
Specifications per type Material (housing)
Specifications per type
Specifications per type
TQ30 TQ40-B TQ40-C
TQ30 TQ40-B TQ40-C
TQ30 TQ40-B TQ40-C
Specifications per type Suitable for ø
Suitable for
Suitable for ø
ø 18mm ø 18mm
ø 18mm ø 18mm
ø 18mm ø 18mm
cable 28mm
TQ30 TQ40-B TQ40-C
cable 28mm
cable 28mm
Suitable for ø
ø 18mm ø 18mm
cable 28mm
Please be aware, product liability, fulfilment to requirements and
Please be aware, product liability, fulfilment to requirements and
Please be aware, product liability, fulfilment to requirements and
warranty are all expired when modifications on the product are made.
warranty are all expired when modifications on the product are made.
warranty are all expired when modifications on the product are made.
Printing and typographical reserved.
Please be aware, product liability, fulfilment to requirements and Printing and typographical reserved.
Printing and typographical reserved.
warranty are all expired when modifications on the product are made.
ELEQ reserves the right to carry out modifications on its products, in
ELEQ reserves the right to carry out modifications on its products, in
Printing and typographical reserved. ELEQ reserves the right to carry out modifications on its products, in
order to improve them, without prior notice.
order to improve them, without prior notice.
order to improve them, without prior notice.
ELEQ reserves the right to carry out modifications on its products, in
order to improve them, without prior notice.
Safety instruction
Safety instruction
Safety instruction
All activities for installation, commissioning and maintenance All activities for installation, commissioning and maintenance
All activities for installation, commissioning and maintenance
Safety instruction
of this current transformer must be performed by qualified of this current transformer must be performed by qualified of this current transformer must be performed by qualified
All activities for installation, commissioning and maintenance personnel that have the knowledge of applicable safety personnel that have the knowledge of applicable safety
personnel that have the knowledge of applicable safety
precautions. This guide assumes that the reader of this of this current transformer must be performed by qualified precautions. This guide assumes that the reader of this
precautions. This guide assumes that the reader of this
document has sufficient electro-technical knowledge to
document has sufficient electro-technical knowledge to personnel that have the knowledge of applicable safety document has sufficient electro-technical knowledge to
precautions. This guide assumes that the reader of this understand the content of this document. understand the content of this document.
understand the content of this document.
document has sufficient electro-technical knowledge to
understand the content of this document.
General
General
General
The TQ split-core with voltage output is a low power (split-
General
The TQ split-core with voltage output is a low power (split-
The TQ split-core with voltage output is a low power (split- core) current transformer (LPCT), and can only be used
core) current transformer (LPCT), and can only be used
core) current transformer (LPCT), and can only be used The TQ split-core with voltage output is a low power (split- measuring alternating currents. The TQ is suitable only for
measuring alternating currents. The TQ is suitable only for
measuring alternating currents. The TQ is suitable only for core) current transformer (LPCT), and can only be used
mounting on insulated primary conductors in a weather
mounting on insulated primary conductors in a weather
mounting on insulated primary conductors in a weather protected and dry location. measuring alternating currents. The TQ is suitable only for
protected and dry location.
protected and dry location.
mounting on insulated primary conductors in a weather
protected and dry location.
Explanation of symbols
Explanation of symbols
Explanation of symbols
Explanation of symbols
IEC 61869-10
IEC 61869-10
IEC 61869-10
30 x Ipr / 1s
30 x Ipr / 1s
30 x Ipr / 1s
2,5 x Ith IEC 61869-10
2,5 x Ith
2,5 x Ith
30 x Ipr / 1s
100%
100%
100%
0,72/3/5kV 2,5 x Ith
0,72/3/5kV
0,72/3/5kV
100% 50/60Hz
50/60Hz
50/60Hz
0,72/3/5kV E (120°C)
E (120°C)
E (120°C)
50/60Hz PA 6, UL94: V2
PA 6, UL94: V2
PA 6, UL94: V2
E (120°C)
PA 6, UL94: V2
TQ50-E TQ50-L
TQ50-E TQ50-L
TQ50-E TQ50-L
ø 2x ø
ø ø 2x ø
ø 2x ø
42mm 42mm
TQ50-E TQ50-L
42mm 42mm
42mm 42mm
ø 2x ø
42mm 42mm
ELEQ b.v.
Tukseweg 130, 8331 LH Steenwijk, The Netherlands
+31 (0) 521 533 333
This product is designed according
This product is designed according
This product is designed according
EN 61010-2-032:2012 standards and therefore this
EN 61010-2-032:2012 standards and therefore this
EN 61010-2-032:2012 standards and therefore this
product meets the requirements of the Low Voltage
This product is designed according
product meets the requirements of the Low Voltage
product meets the requirements of the Low Voltage
Directive 2014/35/EU.
EN 61010-2-032:2012 standards and therefore this
Directive 2014/35/EU.
Directive 2014/35/EU.
product meets the requirements of the Low Voltage
Do not apply around or remove from UNINSULATED
Directive 2014/35/EU.
Do not apply around or remove from UNINSULATED
Do not apply around or remove from UNINSULATED
HAZARDOUS LIVE conductors, which may render
HAZARDOUS LIVE conductors, which may render
HAZARDOUS LIVE conductors, which may render
electric shock, electric burn, or arc flash.
Do not apply around or remove from UNINSULATED
electric shock, electric burn, or arc flash.
electric shock, electric burn, or arc flash.
HAZARDOUS LIVE conductors, which may render
electric shock, electric burn, or arc flash.
Read the installation guide before mounting the
Read the installation guide before mounting the
Read the installation guide before mounting the
product. Unprofessional work activities on electrical
product. Unprofessional work activities on electrical
product. Unprofessional work activities on electrical
installations may result in a threat of danger to the life
Read the installation guide before mounting the
installations may result in a threat of danger to the life
installations may result in a threat of danger to the life
and health of human beings and livestock!
product. Unprofessional work activities on electrical
and health of human beings and livestock! and health of human beings and livestock!
installations may result in a threat of danger to the life
and health of human beings and livestock!
RoHS Directive (EU) 2015/863
RoHS Directive (EU) 2015/863
RoHS Directive (EU) 2015/863
ELEQ states that they only uses qualified components
ELEQ states that they only uses qualified components
ELEQ states that they only uses qualified components
in their products from manufacturers,
RoHS Directive (EU) 2015/863
in their products from manufacturers,
in their products from manufacturers,
specifications meet or exceed the requirements of the
ELEQ states that they only uses qualified components
specifications meet or exceed the requirements of the
specifications meet or exceed the requirements of the
European Directive for the Restriction of use of
in their products from manufacturers,
European Directive for the Restriction of use of
European Directive for the Restriction of use of
certain Hazardous Substances.
specifications meet or exceed the requirements of the
certain Hazardous Substances.
certain Hazardous Substances.
European Directive for the Restriction of use of
certain Hazardous Substances.
WEEE Directive 2012/19/EU
WEEE Directive 2012/19/EU
WEEE Directive 2012/19/EU
The 'crossed out wheeled bin' symbol indicates that
The 'crossed out wheeled bin' symbol indicates that
The 'crossed out wheeled bin' symbol indicates that
the equipment should not be disposed as unsorted
the equipment should not be disposed as unsorted WEEE Directive 2012/19/EU
the equipment should not be disposed as unsorted
municipal waste. Contact a qualified recycler for
The 'crossed out wheeled bin' symbol indicates that
municipal waste. Contact a qualified recycler for
municipal waste. Contact a qualified recycler for
disposal.
the equipment should not be disposed as unsorted disposal.
disposal.
municipal waste. Contact a qualified recycler for
disposal.
info@eleq.com www.eleq.com
84143/ EN2201
84143/ EN2201
84143/ EN2201
84143 / EN2201
TQ Split-Core Current Transformer
TQ Split-Core Current Transformer
TQ Split-Core Current Transformer
Installation Guide
TQ Split-Core Current Transformer
Installation Guide
Installation Guide
to the
Installation Guide
to the
to the
to the
whose
whose
whose
whose
TQ30
TQ30 TQ30
TQ40-B
TQ40-B
TQ40-B
TQ30
TQ40-C
TQ40-C
TQ40-C
TQ40-B
TQ50-E
TQ50-E
TQ50-E
TQ40-C
TQ50-L
TQ50-L
TQ50-L
TQ50-E
TQ50-L
Read this installation guide before installing the product
Read this installation guide before installing the product
Read this installation guide before installing the product
Read this installation guide before installing the product
ELEQ b.v.
Tukseweg 130, 8331 LH Steenwijk, The Netherlands
+31 (0) 521 533 333 info@eleq.com www.eleq.com