Storage Humidity:10~80%RH 8) If any foreign matter, water or liquid enters the device, disconnect the USB cable immediately. Please send it to ACCU-SCOPE for maintenance. DO NOT use a hair dryer to dry it by yourself. 9) To prevent microscope from being tripped over or dropped, please put away the device's USB cables in use or standby.
PC App Operation Guide Introduction This operation guide provides instructions for the use of the SKYE View 3 PC App (Windows only) with SKYE WiFi 3 cameras. The app can be for both USB-wired, Ethernet, or WiFi connection to the camera.
② Power indicator LED ⑥ HDMI port ③ Mode switch (WiFi / Off / USB) ⑦ Ethernet port ④ ACT indicator LED ⑧ USB / power cord (attached) 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com ACCU-SCOPE, Inc. - 6 -...
1) Download and install SKYE View software from the included USB stick, or from our software downloads page (https://accu-scope.com/support/software-updates). If prompted with dialog box regarding unrecognized publisher, choose “More info” then “Run anyway”. 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com ACCU-SCOPE, Inc. - 8 -...
NOTE: Be sure to download the SKYE View app version that corresponds to the version of your SKYE WiFi camera, specifically use SKYE View 3 with SKYE WiFi 3 cameras and SKYE View 2 with SKYE WiFi 2 cameras. Due to hardware differences between camera versions, these apps/software are not interchangeable and are not backwards compatible.
5) Run SKYE View 3 on the Windows PC, laptop or mobile device. 6) If there is only one network camera on the LAN, the software can automatically view the live image from the camera.
1), then choose Select camera. A pop-up menu appears with a list of available cameras (Figure 2). The list automatically shows all cameras in the current local area network (Figure 3). Select a camera by clicking on it. SKYE View 3 supports switching between cameras on the same LAN at any time.
Install SKYE View app 2) Download and install SKYE View app as described previously. Connect to Camera 3) Follow the previously described instructions to connect your device and SKYE View 3 app/software to the camera. Start to Use 4) Follow the previously described instruction to enter live preview mode and begin imaging. The images will appear both on the PC or mobile device being used to control the camera AND the HDMI-connected monitor or projector.
SKYE View 3 PC App Operation Guide Combine Color Images Working Mode Bar 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com ACCU-SCOPE, Inc. - 17 -...
SKYE View 3 PC App Operation Guide Camera Property Control 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com ACCU-SCOPE, Inc. - 18 -...
All items returned for warranty repair must be sent freight prepaid and insured to ACCU-SCOPE INC., or UNITRON Ltd., 73 Mall Drive, Commack, NY 11725 – USA. All warranty repairs will be returned freight prepaid to any destination within the Continental United States of America.