Clas Ohlson XYPJ001UK Operating Instructions

Night Sky Projector Lamp
Art.no 18-1380 Model XYPJ001(UK)
36-6539 XYPJ001
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right
for any errors in text or images and any necessary changes
made to technical data. If you have any questions concerning
technical problems please contact our Customer Services.
Safety
• The lamp can be powered either by 3 × AA batteries or by
the included 4.5 V DC mains adaptor (300 mA, centre pin-
positive).
• The lamp must not be opened or modified in any way. Try not
to remove the plastic housing from the base of the lamp.
• Do not touch the plastic housing while the lamp is switched
on, it can get hot.
• The LEDs in the lamp are not replaceable.
• Remove the cover from the battery compartment. Insert
three LR6 (AA) batteries (sold separately) in accordance with
the markings. Refit the cover and ensure that it is secure. Do not
let children replace the batteries; it must be done by an adult.
• Never mix old and new batteries or batteries of different types.
Remove any depleted batteries. Never try to recharge non-
rechargeable batteries. The battery terminals must never be
short-circuited.
• The lamp is not a toy. Keep it out of children's reach.
Power supply
The lamp can be powered by batteries or the mains adaptor.
Batteries
Remove the cover from the battery compartment. Insert
three LR6 (AA) batteries (sold separately) in accordance with
the markings. Refit the cover and ensure that it is secure.
Mains adaptor
Connect the DC connector of the included AC/DC mains power
adaptor to the socket on the back of the lamp. Plug the mains
adaptor into an electrical socket. Remove the batteries from
the lamp when powering it using the mains adaptor.
GREAT BRITAIN • customer service tel: 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk postal: 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Operating instructions
1. Place the lamp in a dark room.
2. Control the lamp using the [ STAR ] and [ LED ] buttons.
A
A. [ STAR ] Press 1 time for solid white light and
rotating light. Press 2 times for flashing white light.
Press 3 times to turn the lamp off.
B. [ LED ] Press 1 time for flashing RGB LEDs. Press 2
times for stepless changing RGB LEDs. Press 3 times to
turn the lamp off.
Care and maintenance
• Switch the lamp off before cleaning.
• Clean the product using a soft, damp cloth. Use a mild
detergent. Never use solvents or strong, abrasive cleaning
agents.
Responsible disposal
This symbol indicates that this product should not
be disposed of with general household waste.
This applies throughout the entire EU. In order
to prevent any harm to the environment or
health hazards caused by incorrect waste
disposal, the product must be handed in for
recycling so that the material can be disposed
of in a responsible manner. When recycling your
product, take it to your local collection facility
or contact the place of purchase. They will
ensure that the product is disposed of in
an environmentally sound manner.
Specifications
4.5 V DC from either 3 × LR6 (AA) batteries or
Voltage
300 mA centre pin-positive AC/DC adaptor.
B