Page 1
UTi165A+ Professional Thermal Imager User Manual P/N:110401111071X...
Page 2
UTi165A+ User Manual Preface Thank you for purchasing the new UTi165A+ thermal imager. In order to use this product safely and correctly, please read this manual thoroughly, especially the safely instructions part. After reading this manual, it is recommended to keep the manual at an easily accessible place, preferably close to the device, for future reference.
UTi165A+ User Manual UTi165A+ User Manual 1. Safety Instructions Table of Contents To ensure proper use of this product, please read the instructions carefully before using. 1. Safety Instructions ----------------------------------------------------- 4 Please use the product indoors without wind. 2. Structure ------------------------------------------------------------------ 5 When changing to a new environment, please turn on the product and leave it for 10 to 15 minutes before measuring.
UTi165A+ User Manual UTi165A+ User Manual 4. Power On/Off 5.2 Palette Press and hold the power button for 3 seconds to turn on/off the product. Note: After the product starts the shutdown procedure, it takes 5 to 6 seconds. Please try to avoid turning on and off the product continuously to avoid damage. 5.
Page 6
UTi165A+ User Manual UTi165A+ User Manual 5.4 Image Mode 5.3 Point Temperature 1. Press the SET button to open the main menu. 2. Press the left/right button to select the option. 3. Press the SET button to enter the Point Temperature menu. 4.
Page 7
UTi165A+ User Manual UTi165A+ User Manual 5.5.2 Date and Time 5.5 Settings To set date and time: 1. Press the up/down button to select the Date and Time option in the settings menu. To enter Settings menu: 2. Press the SET button to enter the Date and Time submenu. 1.
Page 8
UTi165A+ User Manual UTi165A+ User Manual 5.5.4 HI/LO Alert 5.5.6 Display Brightness To set high/low temperature alert: 1. Press the up/down button to select the HI/LO Alert option in the Settings menu. To set display brightness: 2. Press the SET button to enter the HI/LO Alert submenu. 3.
Page 9
UTi165A+ User Manual UTi165A+ User Manual 5.5.10 System Settings 5.5.8 USB Mode To set USB mode: 1. Press the up/down button to select the USB Mode option in the Settings menu. 2. Press the SET button to enter the USB Mode submenu. 3.
UTi165A+ User Manual UTi165A+ User Manual Factory Reset To format SD card: 1. Press the up/down button to select the Format SD Card option in the System Settings submenu. 2. Press the SET button to enter. 3. Press the up/down button to select Yes. 4.
Page 11
UTi165A+ User Manual 6.2 Image Viewing 6.4 USB Communication and Image Projection 1. Download and install the PC software (refer to UNI-T Documents Download Operation Guide). 2. Connect the USB cable to the PC. 3. Set the USB mode to USB Disk to browse pictures and analyze data through the PC software;...
0.09 Rust Copper plate Gypsum 0.06 0.75 Black aluminum 0.95 Paint Human skin Rubber 0.95 0.98 Asphalt 0.96 Soil 0.93 0.93 Note: This manual can be downloaded from the official website of Uni-Trend (refer to UNI-T Documents Download Operation Guide).