Airplane Mode; Access Point Set - Sony DSC-WX350 Manual

[117] How to Use

Airplane Mode

When you board an airplane, etc., you can turn off all Wi-Fi functions temporarily.
1. MENU → (Wireless) → [Airplane Mode] → desired setting.
If you set [Airplane Mode] to [On], an airplane mark will be displayed on the screen.
[118] How to Use
WPS Push
If your access point has the WPS button, you can register the access point to this product
easily by pushing the WPS button.
1. MENU → (Wireless) → [WPS Push].
2. Press the WPS button on the access point you want to register.
Note
[WPS Push] works only if the security setting of your access point is set to WPA or WPA2
and your access point supports the WPS button method. If the security setting is set to
WEP or your access point does not support the WPS button method, perform [Access
Point Set.].
For details about the available functions and settings of your access point, see the access
point operating instructions or contact the administrator of the access point.
A connection may not be enabled depending on the surrounding conditions, such as the
type of wall material or if there is an obstruction or poor wireless signal between the
product and access point. If that happens, change the location of the product or move the
product closer to the access point.
[119] How to Use

Access Point Set.

You can register your access point manually. Before starting the procedure, check the SSID
Using Wi-Fi functions
Using Wi-Fi functions
Using Wi-Fi functions
Changing the settings of Wi-Fi functions
Changing the settings of Wi-Fi functions
Changing the settings of Wi-Fi functions