Safety Warnings For Multi-Tool - Skil PWRCORE 20 OS5937-00 Owner's Manual

Do not use a battery pack or tool that is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or
temperature above 265 °F may cause explosion.
Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specified in the instructions. Charging improperly or at temperatures
outside the specified range may damage the battery and increase the risk of fire.
Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts . This will ensure that the safety of the power tool is maintained.
Never service damaged battery packs . Service of battery packs should only be performed
by the manufacturer or authorized service providers.

SAFETY WARNINGS FOR MULTI-TOOL

Hold the power tool by insulated gripping surfaces, when performing an operation
where the cutting tool may contact hidden wiring or its own cord. Cutting tool contacting
a "live" wire may make exposed metal parts of the tool "live" and could give the operator an
electric shock.
A suitable breathing respirator must be worn while sanding lead paint, some woods
and metal to avoid breathing the harmful/toxic dust or air .
Always wear safety goggles and a dust mask when sanding, especially when sanding
over-head .
The machine is not suitable for wet sanding .
Do not use sanding paper larger than needed . Extra paper extending beyond the sanding
pad can cause serious lacerations.
Secure the workpiece . A workpiece clamped with clamping devices or in a vice is held more
securely than by hand.
Keep hands away from the cutting range . Do not reach under the workpiece. Contact with
the blade can lead to injuries.
Keep your hands away from the motor-housing vents . Hot air comes from the vents during
operation.
5