Advertisement
Details for pairing this heater to the Goldair App can be found at the below website link.
Either scan the QR code below or enter the website into your browser.
New Zealand Products
https://www.goldair.co.nz/
goldair-app
To connect to the Goldair app you must ensure that your device is in
pairing mode which is where the Wifi Icon is flashing.
Most products will be in pairing mode after switching the device on
but if it is not:
-
Put device on STAND-BY mode (ON at the wall but device is OFF)
-
Hold down "OSCILLATION" for around 5 seconds or until the Wifi
icon begins to flash.
Pairing APP to Device
Pairing Mode
Australia Products
https://www.goldair.com.au/
goldair-app
Advertisement
