•
The base of the tower fan comes in two parts, which fit around the oscillation base.
•
Both parts fit easily together. The back half is the one with cut-outs for the power supply cord.
•
For ease of assembly, turn the unit upside down ensuring that you are careful not to damage
the top of the fan.
•
First remove the large plastic nut from the bottom of the main fan body.
•
Attach the front half of the base, aligning the holes in base with the locating lugs in the
oscillation base, and leading the power cord through the centre hole.
•
Then snap the back half of the base to the front half and secure to the base of the fan with the
large plastic nut.
•
Stand back up and stand the fan upright on its base ensuring it doesn't tip over
•
Thread the power supply cord through the two cut-outs
at the bottom of the base.
Assembly