Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Goldair Platinum GPTF390
Summary of Contents for Goldair Platinum GPTF390
- Page 1 Platinum Series 117cm Tower Fan with WiFi Model: GPTF390...
- Page 2 General Care and Safety Guide Thank you for choosing this Goldair product. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference.
- Page 3 General Care and Safety Guide 20. Never place appliance close to radiant heat source. 21. Never operate in areas where petrol, paint or other flammable liquids are used or stored. 22. Never use the appliance to dry clothes. 23. Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
- Page 4 General Care and Safety Guide The remote control supplied with this heater uses a CR2025 coin type battery. DANGER IF SWALLOWED Keep batteries out of reach of children. Swallowing may lead to serious injury or death in as little as 2 hours due to internal burns. If swallowed, go straight to a hospital emergency room.
- Page 5 Assembly The base of the tower fan comes in two parts, which fit around the oscillation base. Both parts fit easily together. The back half is the one with cut-outs for the power supply cord. First remove the large plastic nut from the bottom of the main fan body. Attach the front half of the base, aligning the holes in base with the locating lugs in the oscillation base, and leading the power cord through the centre hole.
- Page 6 Operating your Fan Always choose a safe location for the fan, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. This appliance requires no installation, it should be used solely as a portable appliance. WARNING: Keep all objects at least 1 metre from the front, sides and rear of the appliance.
- Page 7 • Open the APP Store or Google Play on your mobile phone. • Open “Search” and enter “Goldair" • Click “GET” and begin to download and install. Once downloaded to your phone open the APP Tap REGISTER in the centre of the screen.
- Page 8 WiFi – Downloading and Setting up APP You can either register an email address or a phone number. The APP defaults to email but you just need to tap the “Register by Phone” at top right of the screen to change. Enter you email address or a phone number then press “Get authentication code”.
- Page 9 Pairing APP to Fan Enter the verification code that you will receive by email or text message Next you will be prompted to Set a Password. The password must contain 6 - 20 characters and must be a mix of letters and numbers.
- Page 10 Pairing APP to Fan We recommend allowing the APP to The next screen looks like the below. From access your location. here you can create your own family set up. Once you set up your family name you can then start to load the various devices around your home. After you have loaded your rooms, press done in the top right hand corner.
- Page 11 Plug the fan into the mains power and make sure the mains power switch is on. On your phone open the Goldair app. Then tap the “+” button at the top right of the screen. Your tower fan should be ready to connect to your smart phone from when you first turn it off.
- Page 12 Pairing APP to Fan Choose/confirm which WiFi to connect to. Note: your phone may pick up other WiFi signals (e.g. neighbours) so you will need to choose. XXXXXX Enter your WiFi password The phone will then connect to the fan. Ensure you have a good strong signal from your WiFi router.
- Page 13 If the phone and fan fail to connect, then you will need to try to connect again as per the above process. POWER Open the “GOLDAIR" APP to select the fan (when using one mobile phone to control multiple fans, you need to select the fan to be operated).
- Page 14 Operating your Fan from the APP MODE There are 4 modes the fan can go into. To select the mode press the Mode icon. NORMAL – this is the standard and default mode of the fan. 3 Speed settings NATURAL – this mode attempts to mimic the outdoor natural wind type of by constantly changing the wind speed.
- Page 15 Operating your Fan from the APP TIMER To set the timer, press the settings button in the lower right corner and then press countdown timer. When the fan is ON you can set it to turn OFF after a number of hours (1-12 hours) has elapsed. When the fan is OFF the timer can be set to come on after 1 to 12 hrs.
- Page 16 Adding Additional Fans The phone will then connect to the fan. Ensure you have a good strong signal from your WiFi router. Note: The WiFi indicator on the fan screen may disappear during this pairing process. Once complete the screen showing the device has been successfully added will appear.
- Page 17 Tap “Completed” to complete the addition. DEVICE SHARING CANCELLATION Open the “GOLDAIR APP” and tap the 3 dots in the top right of the screen. Tap “Shared devices” and then “Add Sharing” and delete the phone numbers of shared members to cancel the device sharing.
- Page 18 For service or repair, contact an authorised electrical service technician. PROOF OF PURCHASE To receive warranty retain receipt as proof of purchase. (Refer to back of booklet). SUPPORT AND TECHNICAL ADVICE Goldair – New Zealand Goldair – Australia Monday – Friday 8am-5pm Monday – Friday 8am-5pm...
- Page 19 In non-domestic use Goldair limits the voluntary warranty to three months. Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.