Table of Contents
Advertisement
Available languages
Available languages
5.
Reinsert the burner and reattach using the screw and clip
previously removed. Repeat the procedure for each main
burner.
6.
Position the igniters so they are ¼" (6.0 mm) away from
each burner.
Change the Rotisserie Burner Orifice
1.
Use a screwdriver to remove the two screws from the
rotisserie burner heat shield. Remove the heat shield.
2.
Remove the access cover at the back of the grill by
removing the 6 screws at the back of firebox.
3.
Use 24 mm wrench to remove the orifice nut.
4.
Take out the orifice support, and then use a 6 mm socket
and wrench or 6 mm nut driver to remove the LP orifice at
the end of the supply pipe. Replace with Natural gas
orifice.
22
Advertisement
Table of Contents
