Table of Contents
Advertisement
CLEANING
Disconnect the washing machine from the power mains and open the door. Clean the washing machine drum
with a damp cloth and a mild detergent.
Connect the washing machine to the power mains and run the dedicated drum cleaning program. See
chapter "WASHING PROCESS; STEP BY STEP (1–8)" /STEP 5: CHOOSE THE PROGRAM.
No program can be started while the door is open.
SETTINGS BEFORE FIRST USE
After connecting the washing machine and power it for the fi rst time, you will be asked to do following
settings:
1. Language selection
Press the button 2 or the program selector knob to scroll the list of languages. Confi rm your selection by
pressing the OK button.
2. Water hardness
The following water hardness settings are available: soft / normal / hard.
How to use the test strip:
1. Turn on the water tap and let the water run for a minute or so.
2. Fill a glass with cold water.
3. Remove the test strip from its packaging.
4. Dip the test strip in the water for about one second.
5. Wait one minute. Now compare the colours of the squares with the water hardness table.
Test strip
4 green
1 red
2 red
3 red
4 red
Table for water hardness; See chapter "SYSTEM SETTINGS/WATER HARDNESS".
Press the "Finalize" button to confi rm your selection.
For further washing process, see chapter "WASHING PROCESS; STEP BY STEP (1–8)".
The amount of detergent also depends on the hardness of water. For details, see the detergent
packaging. Please contact your local water supply company to check the water hardness in your area.
8
°dH
°fH
< 3
< 5
> 4
> 7
> 7
> 12
> 14
> 25
> 21
> 37
Advertisement
Table of Contents
