Asko W4096R/1 User Manual page 24

STEP 6:
CHOOSING THE PROGRAM SETTINGS
Using the program settings, the washing programs can be further adjusted to your wishes.
Some program settings may not be available for your selected program.
Selected program settings will remain stored after the end of the washing cycle and may be changed
subsequently (except for Start delay and Anti-crease, which are not stored after the wash is complete).
Programs with selected temperatures above 60 °C due to safety of your laundry will not be stored after the
end of the washing cycle.
1. Washing mode
2. Temperature
3. Spin speed
Choose the program settings before pressing the START button.
Program settings cannot be changed during the progress of a program.
Press and hold the button under the program setting to display the information (INFO) about each
program setting.
Following are the program settings that may be selected using the buttons 1 to 6:
1. Washing mode
By pressing the button 1, you can choose between washing modes:
• Normal mode / Off mode
(Basic setting)
• Green mode
(Wash that saves energy; longer washing time, lower water consumption).
• Speed Mode
(Time-saving wash; shorter washing times, higher water and energy consumption)
In the Cotton program, we recommend a half-load.
• Allergy Mode
(Wash with extra water, extra rinsing, extended washing time, higher water and energy consumption).
• Intense Mode
(Wash that improves cleaning performance, with extra water and extended washing time).
2. Temperature
By consecutively pressing the button 2, you can set the temperature for the selected program, choosing from
the following available values:
Cold wash and 20/30/40/50/60/70/80/90 °C.
The actual available temperature options will depend on the selected program.
24
1 2 3
4. Additional program option (choosing extra
functions)
5. Start delay
6. Dose Modes
4 5 6