Table of Contents
Advertisement
CLEANING THE RINSING HOLES (UNDER THE AGITATOR IN THE DRUM)
If you believe that objects like nails or paper clips fell into the washing machine drum, check the area
underneath the agitator. Such objects may rust (corrode) and cause stains on your clothes. Nails and other
sharp objects can also cause holes in the fabric.
Proceed as follows:
If you are using hard water
If you are washing with hard water (causing limescale build-up), a greyish-white fi lm may appear on the
washing machine drum. To remove this fi lm, add vinegar (approximately 2 dl or sodium bicarbonate "baking
soda" (1 tablespoon or 15 g)) into the washing machine drum and select any program with a temperature of
90 °C, or the Drum Cleaning program. See STEP 5: Choose the program.
Repeat the process as necessary.
Water hardness can be set under "SYSTEM SETTINGS / Water / Water Hardness".
Insert a screwdriver or a similar tool into the slot in
1
the rib and carefully push it to the left.
Hold the rib with the other hand and pull it towards
2
you.
Lift the drum rib.
3
Remove any objects.
4
Place the rib into the installation slot indicated with
5
"F" towards you. Make sure all ribs are fi rmly in
place in their respective slots in the drum. Push the rib
inwards (as indicated by the arrow in the fi gure) until it
snaps.
43
Advertisement
Table of Contents
