Battery And Device Care - Samsung SM-R930 User Manual

Apps and features
Quick launch: Set to launch the selected feature by bending the wrist you are
•
wearing your Watch on up and down twice within five seconds after turning on the
screen while closing your fist. Tap Select an option and set the feature to be turned
on with this method.

Battery and device care

The device care feature provides an overview of the status of your Watch's battery,
storage, and memory.
Battery
Check the remaining battery power and time to use the Watch. If the battery is low, turn
on power saving mode to reduce battery consumption.
On the Settings screen, tap Battery and device care → Battery.
Power saving: Turn on power saving mode to extend the battery's usage time.
•
Sleeping apps: Select apps to sleep in the background. Sleeping apps only run in the
•
background occasionally to extend the battery's usage time.
Watch only: Only the watch appears on the screen and all other features will be
•
turned off to reduce the battery consumption. Press the Home button to check the
watch. To turn off watch only mode, press and hold the Home button. Alternatively,
place the Watch on the wireless charger.
The usage time left shows the time remaining before the battery power runs
out. Usage time left may vary depending on your Watch settings and operating
conditions.
Storage
Check the status of the used and available storage.
On the Settings screen, tap Battery and device care → Storage.
The actual available capacity of the internal storage is less than the specified
•
capacity because the operating system and default apps occupy part of the
storage. The available capacity may change when you update the Watch.
You can check the available capacity of the internal storage in the Specification
•
section for your Watch on the Samsung website.
120