LG LSN120HSV Installation Manual page 15

Installation of Indoor Unit
1. Hook the indoor unit onto the upper portion of
the installation plate.( engage the three hooks
at the top of the indoor unit with the upper edge
of the installation plate) Ensure that the hooks
are properly seated on the installation plate by
moving it left and right
2. Unlock the tubing holder from the chassis and
mount between the chassis and installation
plate in order to separate the bottom side of the
indoor unit from the wall
Piping
1. Insert the connecting cable through the bottom side of indoor unit and connect the cable (You
can see detail contents in 'Connecting the cables' section)
<Left side piping>
View
2. Secure the cable onto the control board with the cable retainer.
Must use the elbow type (L-Type) conduit.
Terminal block
Connecting cable
Cable retainer
Installation plate
Tubing Holder
<Right side piping>
View
Terminal block
Connecting cable
Cable retainer
Installation Manual 15
Installation