Power Management Function; Using The Monitor's Advanced Features - Sampo SME-32DL5 User Manual

USING THE MONITOR' S ADVANCED FEATURES
`
INPUT
WIDE
R/C ONLY
▼CHANNEL▲
RGB AV1 AV2
TV YC C
B R
RS232 CONTROL ITEM
BRIGHTNESS
CONTRAST
POWER ON/OFF
RECALL
DEGAUSS
MUTE ON/OFF
PANEL KEY LOCK
Press this button to select the source of display. Each time the
input button is pressed, the on screen display will appear "AV1",
"AV2", "AV3", "YCBCR", "RGB1", "RGB2" in turn.
AV1→AV2→AV3→YCBCR→RGB1→RGB2
When the source of display is AV1 or AV2 or AV3 or Y CB CR, Press
this button to select the mode of display. Each time the WIDE
button is pressed, the on screen display will appear "4:3", "16:9"
in turn.
This function button only to use for wide screen model serial.
1. Push "+" button, the channel will change from 2→ 3→4→... .
(channels not put in memory will be skipped).
2. Push "-" button, the channel will change from
1→125→ 124→ ... .
(channels not put in memory will be skipped).
※ ¬ This function is only to be used with tuner card installed.
- 34" does not have this function on front panel. Please use
your remote control to change channels.
Press these buttons to directly select the video signal source to
AV3
display
※ Press RGB button to select the source of display. Each time
the input button is pressed, the on screen display will
appear "RGB1" , "RGB2" in turn.
INITIAL VOLUME
INPUT SELECT
COLOR
TINT
V-SIZE
V-POSITION
H-SIZE
H-POSITION
PINCUSHION
PARALLELLOGRAM
TRAPEZOID
SHARPNESS
ROTATION
SAVE
- 24 -