Advertisement
1. READ THE INSTRUCTION BOOK THOROUGHLY
before attempting to operate or carry out any
maintenance on the machine.
understand any part of this manual, ask your dealer
for assistance.
2.
ALWAYS
MAINTENANCE. Never clean, adjust or maintain
the machine until the engine has been stopped, the
machine come to rest, the PTO disengaged and the
key removed.
3.
NEVER WORK UNDER A MACHINE RAISED
ON THE 3-POINT LINKAGE unless it is securely
supported.
4. NEVER OPERATE THE MACHINE WITH ANY
PARTS OR GUARDS MISSING.
guards including the PTO shaft guards are in good
condition and in place before operating the machine.
5
OPERATE SAFELY. Before starting work, check
that there are no persons or animals in the
immediate vicinity of the machine or tractor. Always
maintain full control of the tractor and machine.
Ensure that you know how to stop the tractor and
machine quickly in case of emergency.
Our equipment is designed so as to conform with
current Health & Safety Regulations and therefore
poses no significant hazard to health when properly
used. Nevertheless, in the interests of all concerned, it
is essential that equipment of our manufacture is used
in accordance with the instructions that are supplied or
are available from our Technical Staff.
Legislation requires that all operators are instructed in
the safe operation, cleaning and maintenance of
equipment and machines. This handbook forms part of
that instruction and it must be read and understood
before fitting the machine onto the tractor or attempting
to use it.
The standard warranty is for 12 calendar months against
faulty materials and workmanship. Components supplied as
part of the original machine, but manufactured by another
company, e.g. PTO shafts, wheels etc., are subject to the
original manufacturer's conditions and warranty.
Where repairs are carried out under warranty:-
a) Claims for the fitting of non original parts will not be
considered unless prior agreement has been obtained.
b) The repairer must be advised that the work is to be the
subject of a warranty claim beforehand.
SAFETY FIRST!
If you do not
CARRY
OUT
Check that all
HEALTH AND SAFETY AT WORK
WARRANTY
6. SECURE THE PTO GUARD BY MEANS OF
CHECK CHAINS to suitable points on the tractor
and machine to prevent the outer plastic shield from
rotating.
7. NEVER STAND BETWEEN THE MACHINE AND
THE TRACTOR WHEELS.
SAFE
8. DO NOT WEAR LOOSE OR RAGGED CLOTHING
9. BEWARE OF DUST. Under dusty conditions, keep
the cab windows and doors closed. The use of a
dust mask conforming to EN149 is strongly
recommended.
10.
BEWARE OF HIGH NOISE LEVELS. Some
tractor/implement combinations give noise
levels in excess of 90dB at the operator's ear.
Under such circumstances, ear defenders should be
worn.
Keep cab windows and doors closed to
reduce noise level.
Throughout this handbook, the term `tractor' is used to
refer to the power source used to drive the machine. It
does not necessarily refer to a conventional agricultural
tractor.
Your supplier is responsible for carrying out any
necessary pre-delivery inspection, fitting the machine
onto the tractor and test running. The supplier must
also give instruction in the safe use, maintenance and
adjustment of the machine.
In the interests of safety, please ensure that the
instructions referred to above are brought to the
attention of all your employees who are to use the
equipment.
equipment is restricted to capable trained operatives.
Persons under the age of sixteen should not operate the
machine and should be kept away from where it is being
used.
c) Any claim must be submitted within four weeks of the
repair.
d) The damaged parts must be retained for inspection and
returned carriage paid if required.
The right to withdraw warranty is reserved if:-
a) Non-original parts are fitted.
b) The machine has been abused, badly maintained or
used for purposes other than that for which it was
designed.
We recommend that the use of this
Advertisement
