Changing The Shaver Head; Trimmer; Cleaning And Lubrication; Nose Trimmer Instructions - Create BARBER SHAPE TOOL User Manual

Change the shaver head once a year for best results. The shaver has a long service life if treated
properly.
Shaver heads can only be replaced with shaver heads from this brand.
• Remove the old shaver head piece from the shaver.
• Insert the new shaver head piece into the groove on the top of the shaver and press down firmly.
Turn off the shaver, remove the shaver head, insert the hair clipper into the slot
on the top of the shaver.
Then press down the hair clipper head to install.
Make sure your hair is clean and dry. Do not use the product on wet hair.
• Comb hair in the direction of growth before clipping.
• Insert the comb piece into the slot on both sides, making sure that you hear a
click indicating that the piece has been properly fixed.
• The comb accessories have 3 lengths, 3mm, 5mm and 7mm, for cutting hair to
different lengths. Replace the comb according to the direction marked on the
bottom.
Insert the comb accessories from one side slot to the other.
• Switch on and move slowly over the hair. For best results, clip against the direc-
tion of hair growth.
• Remove the precision trimmer head, use brush to clean the trimmer or clipper, or wash the trimmer
head.
• Do not use abrasive chemicals such as alcohol, gasoline or acetone etc. to clean the product.
• You should clean the product immediately after use.
• For best results, add some lubricating oil every three months.
You will need to purchase this separately.
Turn off the shaver, remove the shaver head, insert the nose trimmer into the slot
on the top of the shaver.
Then press down the nose trimmer head to install.
E N GL I SH
8

CHANGING THE SHAVER HEAD

TRIMMER

CLEANING AND LUBRICATION

NOSE TRIMMER INSTRUCTIONS