Parts List; Charging; How To Use - Create BARBER SHAPE TOOL User Manual

1. Shaver
2. Comb
3. Facial cleaning brush
Make sure the product is switched off before charging.
Fast charge for 5 hours.
Do not leave the product connected to the power supply for more than 24 hours.
1. Insert the product charger into the shaver.
2. Plug in the charger.
3. When charging, the red indicator lights up and when charged, the red light
turns green.
4. The red light flashes when the power is at 10% of the remaining 45 minutes,
indicating that it needs to be charged.
5. Once fully charged, unplug the charger and remove the charger from the shaver.
6. It can be charged using the charging base.
1. Press the ON/OFF button to start the shaver.
2. Move the shaver head over the skin in linear and circular motions.
To ensure better results, the shaver must be cleaned regularly. The easiest and
most sanitary way to clean the product is to wash the shaver head and the hair
reservoir with water after use.
3. Turn the shaver off.
4. Pull away the shaver head on one side, then rotate and pull out the middle head
in the direction indicated by the arrow.
5. Clean the shaver head and the hair reservoir thoroughly with running water.
6. Make sure the inside of both the shaver head and the hair reservoir have been
cleaned thoroughly.
7. Wash the outside of the product.
8. Close the shaver head and remove excess water by shaking lightly.
Do not wipe the shaver head with towels or paper tissues, as this may damage
the shaver head.
9. Reopen the shaver head and leave to dry.
You can also use the brush included to clean the hair reservoir.

PARTS LIST

2
1
6
4. Nose hair trimmer cover
5. Nose & ear trimmer
6. Precision trimmer

CHARGING

HOW TO USE

3 4
7 8
7. Soft face sponge
8. Brush
9. Charger
5
9
E NGLISH
7