Advertisement
Quick Links
Installation Instructions
9400 & 12-9400 Series
Narrow Style Cross Bar Concealed Vertical Rod Exit Devices
WARNING
This product can expose you to
lead which is known to the state of
California to cause cancer and birth
defects or other reproductive harm.
For more information go to www.
P65warnings.ca.gov.
1-800-727-5477 • www.sargentlock.com
Copyright © 2009, 2023, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express
written permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
WARNING
Attention Installer: Improper
installation may result in dam-
age to the product and void the
factory warranty.
A7828B 01/23
Advertisement
Related Manuals for Assa Abloy SARGENT 9400 Series
Summary of Contents for Assa Abloy SARGENT 9400 Series
- Page 1 Installation Instructions 9400 & 12-9400 Series Narrow Style Cross Bar Concealed Vertical Rod Exit Devices WARNING WARNING This product can expose you to Attention Installer: Improper lead which is known to the state of installation may result in dam- California to cause cancer and birth age to the product and void the defects or other reproductive harm.
- Page 2 9400 & 12-9400 Series Narrow Style Cross Bar CVR Exit Deviced Installation Instructions Before installing, verify hand of door & read instructions. Change hand of device. Plate Remove case cover. Rounded End Switch case covers and reassemble. 1. Place cover from present active case onto inactive case, engaging lift fi...
-
Page 3: Test Operation
9400 & 12-9400 Series Narrow Style Cross Bar CVR Exit Deviced Installation Instructions Install active case. Top Strike Top Latch Undog cases using supplied key. Back out screw and Mounting remove tenon from active case lever. Mount active Bracket case engaging hook under lifting fl ange. Secure with screws supplied. - Page 4 9400 & 12-9400 Series Narrow Style Cross Bar CVR Exit Deviced Installation Instructions Install crossbar 1. Slide bar through active and inactive case with screw hole towards active case. Screw plug and bar onto active case with 10-24 x 3/4” cap screw. (Figure 2) 2.
- Page 5 9400 & 12-9400 Series Narrow Style Cross Bar CVR Exit Deviced Installation Instructions Install outside trim Prepare door for trim using template supplied, determine and mark backset on outside of door. Press in top latch plunger screw to project top latch and bottom bolt.
- Page 6 9400 & 12-9400 Series Narrow Style Cross Bar CVR Exit Deviced Installation Instructions Top Latch Adjusting plunger screw Top Strike As the door closes against the top strike, the plunger screw should be adjusted such that upon contact with the top strike, both the top and bottom latch points engage the Top of frame.
- Page 7 9400 & 12-9400 Series Narrow Style Cross Bar CVR Exit Deviced Installation Instructions A7828B 1/23 1-800-727-5477 • www.sargentlock.com Copyright © 2009, 2023, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
- Page 8 A7828B 1/23...
Need help?
Do you have a question about the SARGENT 9400 Series and is the answer not in the manual?
Questions and answers