Samsung Wisenet SDC-9443BV User Manual page 16

camera operations
aGc
0-15 optional. The higher the gain level, the brighter the screen, but the more the noise.
SenS-up
AUTO/OFF. When it is set as AUTO, the higher the frame accumulation, the brighter the image, and the lower
the frame rate under a low-luminance environment.
BriGHtneSS
0-100 is optional, and the larger the value, the brighter the image.
d-wdr
When there are both the bright and dark areas, this function can help you see clear each part on the screen.
Adjust the level as needed, to adjust the image brightness of D-WDR.
1.level
2.return
• LEVEL : Level 0 to 8 optional. And the higher the level, the brighter the dark object.
• RETURN : RET/SAVE&END.
< D-WDR on >
defoG
1.poS/SiZe
2.Gradation
3.default
4.return
• POS/SIZE : POSITION and SIZE of setting area.
• GRADATION : Level 0 to 2 is optional. Higher the level, defog effect will be better.
• DEFAULT : Restore to default settings.
• RETURN : RET/SAVE&END.
The camera can automatically identify the fog density in the image with defog function, and it can vividly display the image
`
J
even when the sight cannot be guaranteed to be clear as affected by the darkness or haze.
16_ camera operations
d-wdr
.........|.....2
ret
defoG
|...............0
ret
< D-WDR off >