Operations; Control Panel - Samsung WW70J4 Series User Manual

Operations

Control panel

01 Cycle Selector
02 Display
03 Temp.
04 Spin
05 Options
06 Delay End
07 Bubble Soak
Power
08
09 Start/Pause
WW70J4243MW_DC68-03755W-01-EN.indd 29
01
Turn the dial to select a cycle.
The display shows current cycle information and estimated
time remaining, or an information code when a problem occurs.
Press to change the water temperature for the current cycle.
Press to change the spinning speed for the current cycle.
• Rinse Hold (No indicator): The final rinse process is
suspended so that the laundry remains in the water. To
unload the laundry, run a drain or spin process.
• No Spin : The drum does not spin after the final drain
process.
Press to select an option from Intensive, Prewash, Rinse+,
Intensive + Prewash, Intensive + Rinse+, Prewash + Rinse+,
Intensive + Prewash + Rinse+. Press again to deselect.
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine's internal logic. For example, this setting is
useful for programming your machine to finish a wash at the
time you normally return home from work.
• Press to choose a preset unit of hours.
Press to activate/deactivate the Bubble Soak function. This
function helps remove a wide variety of stubborn stains.
• Bubble Soak helps remove a variety of stubborn stains.
• With Bubble Soak selected, laundry is thoroughly soaked in
water bubbles for effective washing.
• Bubble Soak is available with and adds up to 30 minutes to
3 cycles: Cotton, Synthetics, and Baby Care.
Press to turn on/off the washing machine.
Press to start or stop operation.
02
03 04 05 06
08
09
07
English 29
2018/6/4 16:35:52