Smart Check - Samsung WW70J4 Series User Manual

Maintenance

Smart Check

To enable this function, you must first download the Samsung Smart Washer app at the Play
Store or the Apple Store, and install it on a mobile device featuring a camera operation.
The Smart Check function has been optimized for Galaxy & iPhone series (applicable models
only).
1. Press and hold the Delay end
enter the Smart Check mode.
2. The washing machine starts the self-diagnosis procedure and display an information code
if a problem is detected.
3. Run the Samsung Smart Washer app on your mobile device, and tap Smart Check.
4. Put the mobile device close to the washing machine's display so that the mobile device
and the washing machine face each other. Then, the information code will be recognized
automatically by the app.
5. When the information code is recognized correctly, the app provides detailed information
about the problem with applicable counteractions.
NOTE
• Smart Check mode will be disabled once you press a button or control after the machine
powers on.
• The function name, Smart Check, may differ depending on the language.
• If there is strong reflected light on the washing machine display, the app may fail to
recognize the information code.
• If the app fails to recognize the Smart Check code consecutively, enter the information
code manually onto the app screen.
36 English
WW70J4243MW_DC68-03755W-01-EN.indd 36
and Options buttons simultaneously for 3 seconds to
2018/6/4 16:35:53