LG E2341VG Owner's Manual page 12

Control Panel Functions
SUPER ENERGY
SAVING Button
AUTO Button
(For D-SUB and
DVI input)
VOLUME Button
(Only for HDMI input)
INPUT Button
(SOURCE Hot key)
EXIT Button
Power Button &
Power Indicator
Use this button to enter SUPER ENERGY SAVING
menu.For more information, refer to page 16.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press the
AUTO button on the MONITOR SETUP OSD. (Only
Analog Mode)
This will automatically adjust your display image to the
ideal settings for the current screen resolution size
(display mode).
The best display mode is
1920 x 1080
To adjust the volume of headphone/speaker.
Use this button to select source from input.
When two input signals at least are connected, you can
select the input signal (D-SUB/DVI/HDMI) you want. When
only one signal is connected, it is automatically detected.
The default setting is D-Sub.
Exit the OSD(On Screen Display).
Use this button to turn the display on or off.
The power indicator stays blue if the display is running
properly (On Mode). If the display is in Sleep Mode , the
power indicator is blinking blue.
11