Table of Contents
Advertisement
Wireless Remote Controller
The controls will look like the following.
Signal transmitter
SLEEP
• Reset (display): When you press the reset button, all the functions shown on the screen of remote
controller (above image), will be visible on the display. But some of these functions are optional for
your product and may not actually function.
ON/OFF BUTTON
Used to turn off/on the unit.
OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
INDOOR FAN SPEED SELECTION BUTTON
Used to select fan speed in six steps low, medium-low,
medium, medium-high, high and natural wind.
PLASMA BUTTON
Used to start or stop the plasma-purification.
SLEEP MODE AUTO BUTTON
Used to set sleep mode auto operation.
Operation Mode
Cooling Operation
Auto Operation
Healthy Dehumidification Operation
Air Circulation
Operating Instructions
Owner's Manual 9
Advertisement
Table of Contents
