Table of Contents
Advertisement
132990430.qxd 01/04/2004 13:28 Pagina 8
Use
Control Panel
1 Detergent dispenser drawer
Programme Option buttons
Depending on the programme, different functions
can be combined. These must be selected after
choosing the desired programme and before
depressing the START/PAUSE button.
When these buttons are pressed, the corresponding
pilot lights come on. When they are pressed again,
the pilot lights go out.
If an incorrect option is selected, the pilot lights flash
for about 2 seconds.
2 "Prewash / Rinse Hold" button
Select Prewash option if you wish your laundry to
be prewashed before the main wash (not
available for wool and hand wash). The relevant
light illuminates.
The prewash ends with a short spin in programmes
for cotton and synthetic fabrics, whereas in the
programme for delicate fabrics the water is only
drained.
When selecting Rinse Hold option, the water of
the last rinse is not emptied out, to prevent the
fabrics from creasing. The relevant light illuminates
and will stay on during washing.
At the end of the programme the pilot light "End"
illuminates, the Rinse Hold and "Door" lights will
remain lit. To drain water, proceed as follows:
turn the programme selector dial to position "O"
to switch the machine off;
select programme
spin);
press Start/Pause button.
The light "Function" comes on during the drain or
the spin programme. At the end of the programme
the "End" light illuminates again and the "Door"
light goes out.
1
2 3 4 5 6 7
(drain) or
(short
3 "Quick Wash" button
This button allows you to select the Quick Wash
function, for laundry that is only slightly soiled (not
for wool, hand wash and economy programme
60E).
The washing time will be reduced according to the
type of fabric and the selected temperature.
Max. load for cotton 3 kg.
4 "Extra Rinse" button
An extra rinse option is available for customers who
may have sensitve skin types.
5 "Start /Pause" button
After having selected the programme and the
required options press this button to start the
machine. The corresponding pilot light stops flashing
and remains lit.
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it was
interrupted, press the Start/Pause button again.
8
8
Advertisement
Table of Contents
