Table of Contents
Advertisement
Configuring Eye Saver Mode, Brightness and Contrast
from the Initial Screen
Adjust the Brightness,
Contrast
and
Eye Saver Mode
Contrast
Eye Saver Mode
Brightness
― The displayed image may differ depending on the model.
Eye Saver Mode
― Not available when
PIP/PBP Mode
is set to On.
Brightness
― This menu is not available when
SAMSUNG
Bright
MAGIC
― This menu is not available when
Eco Saving Plus
― This menu is not available when
Eye Saver Mode
Contrast
― This menu is not available when
SAMSUNG
Bright
MAGIC
― This menu is not available when
Game Mode
― This menu is not available when
PIP/PBP Mode
by moving the JOG button.
Off
is set to
Dynamic Contrast
mode.
is enabled.
is enabled.
is in
Cinema
or
Dynamic Contrast
mode.
is enabled.
is set to
On
and the
Size
is set to
(PBP Mode).
Configuring Volume in the Initial Screen
Adjust the
Volume
by moving the JOG button when the Direct Key Guide is displayed on the screen.
Volume
Mute
― The displayed image may differ depending on the model.
― If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute
the sound or cause choppy audio when applying the headphones or speakers. Set the input volume for the
input device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on
the product.
― What is Auto Mute?
The function mutes the audio to improve sound effect when there is sound noise or when the input
signal is weak, usually due to a problem with the volume of an input device.
― To activate the
Mute
function, access the
Volume
focus down. To deactivate the
Mute
function, access the
the Volume.
50
control screen, then use the JOG button to move the
Volume
control screen, then increase or decrease
13
Advertisement
Table of Contents
