Samsung AM140RNPDKH Series Installation Manual page 24

Setting an indoor unit address and installation option
Setting an indoor unit address (MAIN/RMC)
1. Check whether power is supplied to the indoor unit or not.
- When power is not supplied to the indoor unit, there should be additional source of power supply to the indoor unit.
2. The panel(display) should be connected to the indoor unit to receive option.
3. Depending on the installation condition of the air conditioner, each indoor unit address (MAIN/RMC) should be set.
4. Set the indoor unit address(MAIN/RMC) by using a remote controller.
- The default setting value of the indoor unit address (MAIN/RMC) is "0A0000-100000-200000-300000".
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1
Explanation PAGE
Remote
Controller
Display
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
Indication
and Details
0
Option SEG7
Explanation PAGE
Remote
Controller
Display
Indication Details
Indication
and Details
1
When "A"~"F" is input to SEG5~6, the indoor unit main address is not changed.
If you set the SEG 3 as 0, the indoor unit will maintain the existing main address even if you input the option value
CAUTION
of SEG5~6.
If you set the SEG 9 as 0, the indoor unit will maintain existing RMC address even if you input the option value of
SEG11~12.
You cannot set SEG11 and SEG12 as F value at the same time.
SEG2 SEG3
Setting Main
MODE
address
No Main
0
address
Main
A
address
1
setting
mode
SEG8 SEG9
Setting RMC
address
Indication Details
-
No RMC
0
address
RMC
address
1
setting
mode
ENGLISH-24
SEG4
Hundreds digit of Tens digit of indoor
indoor unit address unit address
Hundreds
0~9 0~9
digit
SEG10 SEG11
Group
channel(*16)
Indication Details Indication Details
-
RMC1
SEG5 SEG6
Unit digit of indoor
unit
address
Tens
0~9 Unit digit
digit
SEG12
Group address
0~F RMC2 0~F