Technical Data; Dimensions - Graco 231-298 Instructions-Parts List Manual

Technical Data

Power Requirements . . . . . . . . . . . . . . . . . . .
Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Working Pressure Range . . . . . . . . . . . . . . . . . . . . .
Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cycles/Gallon (liter) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tip Size . . . . . . . . . . . . . . . . . . . . . . . .
with latex at 2000 psi (138 bar, 13.8 MPa)
Power Cord . . . . . . . . . . . . . . . . . .
Inlet Paint Strainer . . . . . . . . . . . . . . . .
Pump Inlet Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid Outlet Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wetted Parts:
Displacement Pump . . . . . . .
Teflon , Aluminum, Polyethylene, Delrin , Leather
NOTE: Teflon and Delrin are trademarks of the DuPont Company.

Dimensions

Weight (dry w/o packaging)
Height
Length
Width
110 VAC, 50 Hz,
1 phase, 15A minimum
3000W minimum
0–2750 psi
(0–195 bar, 0–19.5 MPa)
1/2 hp
620 (164)
0.33 gpm (1.25 lpm)
one gun to 0.019 new tip
14 AWG, 3 wire, 6 ft (1.8 m)
12 mesh (1525 micron)
Stainless Steel Screen, reusable
1/2 npt(f)
1/4 npsm
Stainless steel, Carbon steel,
Model 231–364
37 lb (17 kg)
19 in. (483 mm)
15 in. (381 mm)
14 in. (356 mm)
DANGER LABELS
The English language DANGER label shown on
page 1 is also on your sprayer. If you have paint-
ers who do not read English, order one of the
following labels to apply to your sprayer. The
drawing below shows the best placement of these
labels for good visibility.
Order the labels directly from Graco, free of
charge: 1–800–328–0211
French 185–956
Spanish 185–961
German 186–041
Greek 186–045
Korean 186–049
English 185–953
Apply other
language here