SMC Networks SMC7908VoWBRA Configuration Manual

SMC7908VoWBRA/B
SMC7908VoWBRA/B SMC7908VoWBRA/B
The VoIP Configuration Guide assumes your Internet is already set up. For instructions on setting up your Internet
connection please refer to the Quick Installation Guide (QIG) provided.
1. The first step is to verify your VoIP service provider has provided all the required configuration settings. The following
table lists the mandatory settings required for successful configuration. To obtain these settings please contact your
VoIP service provider.
Parameters
SMC7908 VoWB RA SMC7908 SMC7908 V V oWB
Username
Password
Phone number
SIP Domain
Realm
SIP Proxy Server address
Proxy Port
SIP Registrar Server address
Registrar Port
Preferred Codec
Tip: Commonly the SIP Proxy and SIP Registrar Server Address and Port are the same. If you only have the Address and
Port settings for the SIP Proxy you can try using the same Address and Port for the SIP Registrar. If registration fails
you will need to verify the SIP Registrar settings with your VoIP service provider.
2. Logon to the Web Management Interface and click on "Advanced Setup". From the "Advanced Setup" screen click on
menu "VoIP", then submenu "VoIP Account". You are now ready to enter the configuration settings provided by your
VoIP service provider.
3. Select "Account 1" for "Account Profile" and tick the "Activated" tick box to activate the account. Un-ticking this box will
disable the account.
Note: You can configure up to 4 VoIP accounts. This is done by selecting account profiles 1-4 and entering the VoIP
configuration settings.
4. Select your VoIP service provider from the "VoIP Provider" drop down list. This will automatically configure the SIP
Domain, Realm, Proxy Address, Proxy Port, Registrar Address and Registrar Port settings. If your VoIP service provider
is not listed select "Other".
5. Input the Username, Password and Phone Number provided. For the "Display Name" enter your phone number. This is
the number that will be displayed when you make a call.
Tip: To hide your phone number, enter "Anonymous" in "Display Name".
Example
oWB R R A A
myusername
mypassword
123456
domain.com
realm.com
sip.domain.com
5060
sip.domain.com
5060
G.729