Safety Information & Power Specs - CPI CUMMINS ALLISON CA-200 User Manual

A-200 PREMIUM 1.5 PKT CURRENCY SCANNER
Safety Information & Power Specs
WARNING
High voltage inside. Risk of electric shock.
Turn power OFF and unplug power cord from machine before cleaning.
Do not attempt repairs. Repairs must be made by authorized Cummins Allison personnel. Use
grounded plug and properly grounded outlet. Read and understand all instructions before use.
NOTICE
Improper voltage levels can cause equipment malfunction, damage electrical
components, and void warranty. Provide separate circuit serving only this device and
follow listed power requirements to ensure proper operation.
Provide power conditioning/stabilizing devices if necessary.
Voltage operating range: 100-240V
Frequency: 50/60 Hz
Full load amps (FLA): 2.4A at 100V, 1A at 240V
Electrical supply circuit: The customer must provide a single-phase, dedicated power line that
meets the machine's power requirements. Use a properly grounded circuit breaker in
compliance with applicable local electrical code.
Environmental Operating Conditions
Temperature: 0-35˚C (For use) / -10-40˚C (For storage)
Humidity: 20-90% RH
Compliance Acknowledgements
FCC: This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: ( t his device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
REGULATORY
ULC & CE Certifications
CAUTION
For continued protection against risk of fire, replace only with same type and rating of fuse. Do
not attempt repairs.
Device servicing and repairs must be made by authorized
Cummins Allison personnel only!
Page 3 of 13