Rear Scanner Unit Cleaning; Note Path Cleaning - CPI CUMMINS ALLISON CA-200 User Manual

Rear Scanner Unit Cleaning

1. Using the green lever, open the cover on the back of the product to check the inside of the rear scanner
unit.
2. Using compressed air, and or a soft brush, carefully remove any dust from the of the CIS sensors.
3. With compressed air, remove dust from the sensor surface.
4. If there is dust present in the groove of the UV sensor, remove it using compressed air.
5. If the rollers are dirty, clean the rollers using the cleaning products recommended later in this guide.

Note Path Cleaning

1. Using the green button, open the cover on the rear of the counter to check the feed path. If dust is
present, blow it out using compressed air.
A-200 PREMIUM 1.5 PKT CURRENCY SCANNER
Page 10 of 13