SMC Networks SMC2621W-P Quick Installation Manual page 5

3. Choose [Standard TCP/IP Port], then click [New Port].
4. Enter the [IP Address] of this Print Server, then click [Next].
5. On the following screen, shown below, select [Custom],
and click the [Settings] button.
7
6. On this sub-screen:
• Select [LPR] in the [Protocol] section.
• Enter the [Queue name] (L1 for Port 1, L2 for Port 2 if the
Print Server has 2 printer ports).
• Ensure the [LPR Byte Counting Enabled] setting is Enabled.
Click [OK] to save your settings and close this screen.
7. Follow the prompts to complete the Wizard.
8