Technical Data; Before Commissioning - Parkside PWH 2800 B2 Operating And Safety Instructions, Translation Of Original Operating Manual

• Only have damage to extension cables
repaired by a qualified electrician.
Warning!
This power tool generates an electromag-
netic field during operation. This field can
impair active or passive medical implants
under certain conditions. In order to pre-
vent the risk of serious or deadly injuries,
we recommend that persons with medical
implants consult with their physician and the
manufacturer of the medical implant prior to
operating the power tool.
Residual risks
The machine has been built according to the
state-of-the-art and the recognised technical
safety requirements. However, individual re-
sidual risks can arise during operation.
• Health hazard due to electrical power,
with the use of improper electrical con-
nection cables.
• Before performing setting or mainte-
nance work, release the start button and
pull out the power plug.
• Furthermore, despite all precautions hav-
ing been met, some non-obvious residual
risks may still remain.
• Residual risks can be minimised if the
"Safety instructions" and "Proper use"
are observed along with the whole of the
operating instructions.
• Avoid accidental start-ups of the ma-
chine: The operating button may not
be pressed when inserting the plug in a
socket.
• Use the tool that is recommended in this
operating manual. This is how to ensure
that your machine provides optimum per-
formance.
• Keep your hands away from the work
area, when the machine is in operation.
Behaviour in an emergency
Initiate the necessary first aid measures for
the injury and seek medical assistance as
quickly as possible.
Protect the injured person from further harm
and keep them calm. A first-aid kit accord-
ing to DIN 13164 should always be avail-
able at the workplace in the event of an ac-
cident. Any material taken from the first aid
kit must be refilled immediately.
When you request assistance, provide the
following information
1. Place of the accident
2. Nature of the accident
3. Number of injured
8 GB/IE
4. Nature of the injuries
5. Wait for further questions

7. Technical data

Dimensions L x W x H .............................630 x 450 x 910 mm
Cutting roller Ø .................................................................87 mm
Number of blades ..................................................................... 8
Capacity of the collection container ....................................60 l
Weight ............................................................................. 20.5 kg
max. branch diameter ......................................................42 mm
Motor ............................................................. 220-240V∼ 50Hz
Nominal consumption P1 ..............................................2800 W
Cutting roller speed ........................................................60 min
Operating mode* ..................................................................P40
Protection category ..............................................................IPX4
Protection class .......................................................................... II
Technical changes reserved!
* Continuous operation with intermittent load (4 min. load - 6
min. idle)
Wear hearing protection.
Excessive noise can result in a loss of hearing.
Noise data
Sound pressure level L ............................................82.9 dB(A)
pA
Uncertainty K .................................................................... 3 dB
pA
Measured sound power level L
WA
Guaranteed sound power level L
Uncertainty K ................................................................... 3 dB
WA
Note:
The specified sound levels have been determined in accord-
ance with a standardised test procedure and can be used to
compare different power tools with one another. In addition,
these values are suitable for estimating the stresses for the user
resulting from the noise in advance.

8. Before commissioning

m ATTENTION!
Always make sure the device is ful-
ly assembled before commission-
ing!
• Open the packaging and carefully remove the device.
• Remove the packaging material, as well as the packaging
and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport dam-
age.
• In the event of complaints the carrier must be informed im-
mediately. Later claims will not be recognised.
• If possible, keep the packaging until the expiry of the war-
ranty period.
• Familiarise yourself with the product by means of the oper-
ating instructions before using for the first time.
-1
.............................95.1 dB(A)
............................98 dB(A)
WA