About This Guide; About The Access Point; Access Point Model Numbers And Regulatory Domains - Cisco Aironet 1800i Getting Started Manual

1

About this Guide

This guide provides instructions on how to install and configure your Cisco Aironet 1800i access
point. This guide also provides mounting instructions and limited troubleshooting procedures.
The Cisco Aironet 1800i access point is referred to as the access point, or abbreviated as AP in this
document.
2

About the Access Point

The Cisco Aironet 1800i access point is an 802.11 a/b/g/n/ac (Wave 2) access point, with internal
antennas only. The access point can be mounted on a wall and supports 2x2:2 SS MU-MIMO
applications.

Access Point Model Numbers and Regulatory Domains

The Cisco Aironet 1800i access point model has the model number format AIR-AP1800I-x-K9, where
the 'x' placeholder represents the regulatory domain. The 'x' can be any one of the supported
regulatory domains as listed at:
http://www.cisco.com/go/aironet/compliance
3