Configuring The Backup Master - SMC Networks TigerStore SMCNAS04 User Manual

1.2 Configuring the Backup Master

After installing the Backup Master, you can start the configuration process.
Your choice is important and impacts how best you can use the device. To start
using the Backup Master:
Double-click the "NAS Backup Master Detector" icon
system tray, or
Select Start Program
NOTE: The first time you start up the Backup Master, the following screen appears. You
need to enter the Product Serial Number found on the cover of your Utility disc.
Note : Please pay attention the number of people use the software at the same
time and the number of install the software of your Serial Number, if exceed,
there are follow error Information will out :
1. If exceed the number of install the software, alarm will out as follow picture
22
NAS Backup Master
on your Windows
NAS Backup Master.