Table of Contents
Advertisement
Quick Links
MG300 v2 Media Gateway
Easily Bridges Most IP Protocols
（2022-11 version）
Contents
Packing List
Device interfaces and functions
Device connection, login and use guide
Device upgrade and restore to factory settings
Before using this product, it is recommended that you read the guide carefully. To ensure your personal safety and avoid physical or electrical damage to the
device, please strictly follow the instructions of this guide to install and use it under the guidance of professionals. Incorrect electrical connections or physical
installation may cause permanent damage to the device and even threaten personal safety.
Leading solution provider of IP-based video transmission
Quick Start Guide
Advertisement
Table of Contents
Related Manuals for Kiloview MG300
Summary of Contents for Kiloview MG300
- Page 1 Leading solution provider of IP-based video transmission Quick Start Guide MG300 v2 Media Gateway Easily Bridges Most IP Protocols （2022-11 version） Contents Packing List Device interfaces and functions Device connection, login and use guide Device upgrade and restore to factory settings ...
-
Page 2: Packing List
1 Packing List (1) MG300 v2 ×1 (2) Power Supply ×1 (3) Warranty Card ×1 (4) Quick Start Guide ×1... -
Page 3: Device Interfaces
2 Device Interfaces SDI output 1000M Ethernet Port 2 LINE OUT Type-C Expansion Port HDMI output 1 USB Expansion Port HDMI output 2 (10) Power Port Reset (11) Working Indicator 1000M Ethernet Port 1 3 LED Indicators Name Color Status Description Power connected Power... - Page 4 Please use the equipped power adapter to power the device. Other unqualified power supplies may damage the device. Connect your Ethernet cable to NET 1 port. MG300 v2 supports up to 9-channel decoding, HDMI and SDI output same or different contents.
- Page 5 5 Login to the device web page Login to the device webpage via the default IP address 192.168.1.168. That is, enter http://192.168.1.168/ in the browser to access the web page. The user name and password are admin by default. When using the device for the first time, please configure the IP address of the device with your network.
- Page 6 After changing the device IP address, please restore your computer network to the working network IP address. If MG300 v2 is connected to the network by Ethernet port 2, the default IP address is: 192.168.2.168! The username and the password are admin by default.
- Page 7 If video source is from network, it is required to configured with a high buffer time for playback buffer until the video decoding output is smooth. For more information about how to add the video source, please refer to: https://www.kiloview.com/en/support/docs/mg300-v2/...
- Page 8 6.2 Preview The added sources will be displayed in the “ Video Source ” , drag the source to the upper “ Source Preview” window to preview the source images and to configure the output parameters. Note It is recommended to use the latest version of Chrome and Edge for preview function. ...
- Page 9 6.3 Output There are two output windows on the webpage of MG300 v2. You can select SDI or HDMI to decode and output the same or different content in the upper right corner of the window. Drag the video source into the output window, that is, output with the selected SDI or HDMI interface.
- Page 10 7 Streaming Service Login to the MG300 v2 webpage, click “Stream Service”>“Add Publishing Points” to add a publishing point, and select the video source that needs to be forwarded. 1) Click “Source” and select the video source in the source list on the right, then the border of the selected video source will turn to red.
-
Page 11: Firmware Upgrading
Select “video decoders” > “MG300 v2”, find and download the latest firmware 8.2 Upgrade firmware Login to the web page of MG300 v2, click "Settings">"Firmware Upgrade" to check if there is any latest firmware available to download. If yes, select the downloaded firmware and click “Firmware Upgrade”. -
Page 12: Restore To Factory Settings
Please not power off during the upgrade process, otherwise the device couldn’t work. Generally, this process can take 3-5 minutes to upgrade the device. If it’s still not completed after 5 minutes, please try refreshing webpage. If you still can’t access it, please try to contact technical support. 9 Restore to factory settings If the device cannot work normally after modified the parameters or forgot internet IP configuration and couldn’t search and find the device, please restore factory settings. - Page 13 Any In,Any Out,Anywhere For more questions, please contact us via： https://www.kiloview.com/en/support KILOVIEW Electronics CO., LTD. Tel：86-18573192787 Email：support@kiloview.com Web：www.kiloview.com/en Address: B4-106/109, Jiahua Intelligence Valley Industrial Park, 877 Huijin Road, Yuhua District, Changsha City, Hunan Province, China.