Beko ATP 7100 I Instruction Manual page 12

8
Always unplug the unit before changing the
HEPA filter.
1. When the filter change indicator
white, it' to change the HEPA filter.
2. Turn off the unit and unplug it.
3. Carefully rotate the body anticlockwise and
r ove it fr
4. R ove the HEPA filter out of the air inlet grill.
5. R ove the pre-filter.
6. Replace a new HEPA filter into the air inlet grill.
7. Put the body onto the air inlet grill, then rotate
the body clockwise until the fastener locks into
the g roove.
8. Simultaneously hold and touch the Power and
Fan speed buttons for 3 seconds, the indicator of
replacing filter will disappear.
9
Problem
12 / EN
ates in
et grill.
Check t ke sure the unit is plugged in.
Check t ke sure the unit is on.
Check condition of the filter and replace if necessary.
Check to ensure nothing is blocking the air inlet and
filtered air outlet.
Be sure the plastic bag has been r oved fr
Air purifier/ Instruction Manual
ter.