Table of Contents
Advertisement
To remove the RAM Module:
1 Follow step 1 to 3 of the "To install the RAM module:" section to shut down your DiskStation, disconnect the
cables, and then remove the bottom panel.
2 Push the levers on both sides of the memory module outwards. The module will be released from the slot.
3 Hold the memory module by its notches and remove it from the slot.
4 Replace the bottom panel. Replace and tighten the screws removed in step 1.
5 Reconnect the cables removed in step 1. Now, you may turn on your DiskStation.
12 Chapter 2: Hardware Setup
Advertisement
Table of Contents
