I
NSTALLING THE
Equipment Checklist
After unpacking the TigerStack III 10/100, check the contents to be sure
you have received all the components. Then, before beginning the
installation, be sure you have all other necessary installation equipment.
Package Contents
◆ TigerStack III 10/100 unit, SMC6824M
◆ Four adhesive foot pads
◆ Bracket Mounting Kit containing two brackets and four screws for
attaching the brackets to the switch
◆ Power Cord—either US, Continental Europe or UK
◆ RS-232 console cable
◆ This Installation Guide
◆ Management Guide
◆ SMC Warranty Registration Card—be sure to complete and return to
SMC
Optional Rack-Mounting Equipment
If you plan to rack-mount the switch, be sure to have the following
equipment available:
◆ Four mounting screws for each device you plan to install in a
rack—these are not included
◆ A screwdriver (Phillips or flathead, depending on the type of screws
used)
3-2
S
WITCH