Hitachi RAK-DJ10PCAST Operation Manual page 6

NAMES AND FUNCTIONS OF REMOTE CONTROLLER
■ This remote controller controls the operation and timer setting of the room air conditioner. The operating
range of the remote controller from the indoor unit is 7m. If indoor lighting is used, the range may be
shorter.
Off Mode Sign
Mode Selector Button
Use this button to select the
operation mode. Every time you
press this button, the mode will
change from (Cool) ➞
(Dry) ➞ (Fan) ➞
(A.Cir) cyclically.
GoodSleep Button
FrostWash Button
Filter Sign Reset Button
Refresh Button
On Timer Button
Select the turn ON time.
Off Timer Button
Select the turn OFF time.
Power SAFE Button
Precautions for Use
Do not put the remote controller under direct sunlight and high temperature.
●
Do not drop it on the fl oor, and protect it from water.
●
If you press the FUNCTION button during operation, the air conditioner may stop for about 3 minutes
●
for protection before you can start it again.
INFORMATION
Capabilities
CAUTION
Do not use a stove or any other high temperature
devices in proximity to the indoor unit.
PROHIBITION
Signal Transmission
Cooling and Dehumidifying Capabilities
If the heat present in a room exceeds the unit's
●
cooling capacity (for example, if there are many
people in the room or other heating appliances
are used), the preset room temperature may not
be reached.
Refrigerant Information
For the refrigerant charge information, please refer to
●
the outdoor unit installation manual or specifi cation
label.
– 6 –
Invalid Operation Sign
Shown at invalid setting or operation
Transmission Sign
The transmission sign blinks
when a signal has been sent.
On/Off Button
Press this button to start
operation.
Press it again to stop operation.
FAN SPEED Button
Select the fan speed.
Powerful Button
SILENT Button
TEMPERATURE Button
Room temperature setting.
Value will change quicker when
you keep pressing.
RESET Button
UP/DOWN Button
Controls the angle of the
horizontal air defl ector.
Left/Right Button