Table of Contents
Troubleshooting
Related Manuals for SNOWJOE SUNJOE CJ601E
Summary of Contents for SNOWJOE SUNJOE CJ601E
- Page 1 User Manual of Product 1: Sun Joe CJ601E Electric Wood Chipper/Shredder, 14-Amp, 16:1 Reduction, Green User Manual of Product 2: Sun Joe SWJ800E 8-Inch 6.5-Amp Telescoping Electric Pole Chain Saw with Automatic Chain Lubrication System...
-
Page 2: General Safety Warnings
® ® 1. Avoid dangerous environments – Do not use the wood customer service center at 1-866-SNOWJOE chipper + shredder in rain or in damp or wet locations. Do (1-866-766-9563) for assistance. not operate the unit in gaseous or explosive atmospheres 11. -
Page 3: Personal Safety
WARNING! 12. Do not overreach – Keep proper footing and balance at Never reach into the hopper until the all times. wood chipper + shredder has come to a complete stop and 13. Never leave a running tool unattended – Turn the is unplugged. -
Page 4: Electric Safety
Power Joe SJTW-A 14-gauge 50-foot extension cord safety requirements. To avoid danger, electrical appliances with lighted end (Model PJEXT50-B). Visit snowjoe.com must only be repaired by qualified personnel using original to purchase this extension cord online or, to order by spare parts;... -
Page 5: Double-Insulated Appliances
Double-Insulated Appliances In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double- insulated appliance requires extreme care and knowledge of the system, and should be performed only by qualified service personnel at an authorized Snow Joe + Sun Joe... -
Page 6: Safety Symbols
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, SAFETY ALERT –... -
Page 7: Technical Data
Know Your Electric Wood Chipper + Shredder Read the owner’s manual and safety instructions carefully before operating the electric wood chipper + shredder. Compare the illustration below to the electric wood chipper + shredder in order to become familiar with the location of the various controls and adjustments. -
Page 8: Carton Contents
+ Sun Joe customer service center at ® ® 1-866-SNOWJOE (1-866-766-9563). NOTE: Do not discard the shipping carton and packaging material until you are ready to use the electric wood chipper + shredder. The packaging is made of recyclable materials. Properly dispose of these materials in accordance with local regulations or save the packaging for long-term product storage. -
Page 9: Operation
Fitting the Paddle Holder and the Paddle Wheel Fig. 5 1. Stand the unit up, and clip the paddle holder to the standing assembly (Fig. 8). Fig. 8 Standing assembly Wheel cover Paddle holder 6. Repeat the steps 2 – 4 to assemble the other wheel. Stand Assembly Fitting 1. - Page 10 3. To power the wood chipper + shredder off, push the Fig. 10 removable safety switch to the OFF position. To disable the machine, remove the safety switch completely Hopper (Fig. 13). locking knob Fig. 13 Removable 1. Make sure the removable safety switch is in the OFF safety switch position.
-
Page 11: Overload Protection
Overload Protection 2. Use the paddle to push the material inside the hopper if needed (Fig. 15). Your electric wood chipper + shredder is designed with overload protection. If the shredder is clogged during Fig. 15 shredding, the overload protection will cut the power automatically to protect your shredder. -
Page 12: Cutting Blade Replacement
IMPORTANT: Only use original replacement parts specified for this wood chipper + shredder. You can purchase a replacement blade (Model CJ601E-RBLD) and other genuine replacement parts by ordering online at snowjoe.com or, to order by phone, contact Snow Joe ® Sun Joe customer service at 1-866-SNOWJOE ®... -
Page 13: Service & Support
Snow Joe + Sun Joe ® ® customer service center at 1-866-SNOWJOE (1-866-766-9563). Model + Serial Numbers When contacting the company or reordering parts, you will need to provide the model and serial numbers of your product. -
Page 14: Troubleshooting
• Reverse the blades or replace with new blades. inefficiently Only a company specialist may be able to correct faults that cannot be rectified with the aid of this table. Please call the Snow Joe + Sun Joe customer service center at 1-866-SNOWJOE (1-866-766-9563). ® ®... -
Page 15: Optional Accessories
NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at snowjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ®... - Page 16 You can reach us at 1-866-SNOWJOE (1-866-766-9563), online a serial number, typically found on the decal affixed to the housing at snowjoe.com, via email at help@snowjoe.com or tweet us or guard of your product. All products require a valid proof @snowjoe.
- Page 17 snowjoe.com...
- Page 18 8-INCH 6.5-AMP ELECTRIC Let Gravity Do The Work POLE CHAIN SAW Model SWJ800E Form No. SJ-SWJ800E-880E-MR2 OPERATOR’S MANUAL A Division of Snow Joe , LLC ® IMPORTANT! 9. Wear proper apparel – Do not wear loose articles of clothing or jewelry since such items may get caught Safety Instructions in moving parts.
-
Page 19: Electrical Safety
WARNING! Some dust and debris created by the WARNING! use of the tool could contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: Electric shock may cause SEVERE INJURY or DEATH. - Page 20 Specific Safety Rules For AVOID CONTACTING THE GUIDE BAR TIP WITH ANY OBJECT. In some cases, when the tip makes contact with an Pole Chain Saws object, it may cause a fast reverse reaction, kicking the guide bar up and back towards the operator. Pinching the saw chain WARNING! along the top of the guide bar may also push the guide bar SHOCK HAZARD! –...
- Page 21 Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand and follow all instructions in the Keep bystanders and children user manual(s) before attempting...
- Page 22 Know Your Electric Pole Chain Saw Read the owner’s manual and safety instructions carefully before operating the pole chain saw. Compare the illustration below to the pole chain saw in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
- Page 23 Snow Joe + Sun Joe customer ® ® ® service center at 1-866-SNOWJOE (1-866-766-9563). Sprocket cover WARNING! Unpacking and assembly should be completed on a flat and stable surface, with adequate space 3. Remove the old chain from the bar.
- Page 24 4. Lay out the new saw chain in a loop and straighten 6. Position the chain so there is a loop at the back of the bar. any kinks. THE SHARP SIDE OF THE TEETH MUST Hold the chain in position on the bar and place the loop FACE AWAY FROM YOU IN THE DIRECTION OF THE around the sprocket (Fig.
- Page 25 8. Tighten the chain tensioner screw only enough to hold the NOTE: A cold chain is correctly tensioned when there bar and chain in place (Fig. 7), ensuring the chain is still in is no sag on the underside of the guide bar; the chain place over the sprocket.
- Page 26 ® WARNING! Do not operate near electrical wires. 50-foot extension cord with lighted end (Model PJEXT50-B). Visit snowjoe.com to order online or call 1-866-SNOWJOE WARNING! Failure to lubricate the chain will cause (1-866-766-9563) to order by phone. damage to the bar and chain. Use only a good quality bar 3.
-
Page 27: Cutting Tips
Cutting Tips 5. To turn the tool OFF, release the trigger switch (Fig. 13). NOTE: Do not press the trigger switch until you are ready Proper Cutting Stance to make a cut. Adjusting the Telescoping Pole • Balance your weight with both feet on solid ground. •... - Page 28 control the PULL when cutting on the bottom edge of the • Release the trigger ON/OFF switch as soon as the cut is bar, and PUSH when cutting along the top edge. completed. Failure to follow proper cutting procedures will result in the bar and chain binding and becoming pinched •...
-
Page 29: Maintenance
+ Sun Joe customer service center ® ® at 1-866-SNOWJOE (1-866-766-9563) for all maintenance operations not foreseen in this manual. Any operation performed in an unauthorized service center or by unqualified Flats are not personnel will completely invalidate the warranty. -
Page 30: Guide Bar Maintenance
You can purchase replacement parts for your Sun Joe on all the cutting edges facing the same way (right or left). ® SWJ800E electric pole saw online at snowjoe.com or, to order • To move the chain forward, use a screwdriver. by phone, contact Snow Joe... -
Page 31: Troubleshooting Tips
1-866-SNOWJOE (1-866-766-9563) live 120 V outlet. for assistance. •... -
Page 32: Model And Serial Numbers
• Inspect the oil port and guide bar rails and clean them to If your Sun Joe SWJ800E electric pole chain saw requires ® remove any debris. service or maintenance, please call 1-866-SNOWJOE • Check the chain tension. (1-866-766-9563) for assistance. • Check the chain teeth for sharpness. Model and Serial Numbers •... - Page 33 NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at snowjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ®...
- Page 34 NOTES...
- Page 35 NOTES...
- Page 36 You can reach us at 1-866-SNOWJOE (1-866-766-9563), online require a serial number, typically found on the decal affixed to the at snowjoe.com, via email at help@snowjoe.com or tweet us housing or guard of your product. All products require a valid proof @snowjoe.
- Page 37 snowjoe.com...