SNOWJOE Martha Stewart MTS-EWC15 Operator's Manual
SNOWJOE Martha Stewart MTS-EWC15 Operator's Manual

SNOWJOE Martha Stewart MTS-EWC15 Operator's Manual

Electric wood chipper + shredder

Advertisement

Quick Links

ELECTRIC WOOD CHIPPER + SHREDDER
15 AMP | 17:1 REDUCTION RATIO
OPERATOR'S MANUAL
Model MTS-EWC15
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety WARNINGS!
You and any other operator of this wood chipper + shredder
must read, understand, and follow these instructions in
their entirety. Failure to follow these instructions may result
in ELECTRIC SHOCK, FIRE, and/or serious PERSONAL
INJURY.
Notice the personal safety alert symbol
manual to draw your attention to a WARNING given along
with the particular operating instruction. This means that
the operation requires special ATTENTION, CAUTION, and
AWARENESS.
m
WARNING!
Wear appropriate personal hearing
protection during use. Under some conditions and duration of
use, noise from this product may contribute to hearing loss.
m
WARNING!
The rotating blades can cut you. Keep
hands and feet away from the hopper and the discharge chute.
Before using the wood chipper + shredder, familiarize yourself
with the controls, especially how to stop the unit in an
emergency. The only individuals who should use the wood
chipper + shredder are those who thoroughly understand
these instructions and know how to properly operate the unit.
Children should never be allowed access to the wood chipper
+ shredder.
Retain this manual for future reference and reread it at the start
of each chipping season.
General Safety
1. Avoid dangerous environments – Do not use the wood
chipper + shredder in rain or in damp or wet locations. Do
not operate the unit in gaseous or explosive atmospheres
or use the unit near flammable or combustible liquids.
© 2018 by Snow Joe
, LLC
®
All rights reserved. Original instructions.
m
used in this
1
Motors in these tools normally spark, and the sparks
might ignite fumes.
2. Dress properly – Do not wear loose clothing or jewelry as
such articles can become caught in moving parts. Wear
a protective covering to contain long hair. Wearing rubber
gloves and substantial non-slip footwear is recommended
when working outdoors.
3. Use safety glasses – Also use dust mask, safety
footwear, snug-fitting clothing, protective gloves, hearing,
and head protection.
4. Extension cords – To prevent electric shock, use only
with an extension cord suitable for outdoor use.
5. Disconnect the tool – Disconnect the wood chipper +
shredder from the power supply when it is not in use,
before servicing it, when changing accessories, and when
performing any other maintenance task.
6. Do not abuse the cord – Never carry the wood chipper
+ shredder by the cord or yank the cord to disconnect it
from the receptacle. Keep the cord away from heat, oil,
and sharp edges.
7. Stay alert – Watch what you are doing. Use common
sense. Do not operate the wood chipper + shredder when
you are tired or under the influence of drugs, alcohol, or
other medication.
8. Store idle tool indoors – When not in use, the wood
chipper + shredder should be stored indoors in a dry and
high or locked-up place out of the reach of children.
9. Maintain the wood chipper + shredder with care –
Keep the cutting edges sharp and clean for optimal
performance and to reduce the risk of injury. Inspect the
extension cord periodically and immediately replace it
if damaged. Keep the handles dry, clean, and free from
oil and grease. Follow the additional recommendations
described in the Care + Maintenance section of this
manual.
10. Check for damaged parts – Before further use of the
appliance, a part that is damaged should be carefully
checked to determine that it will operate properly and
perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts,
mounting, and any other condition that may affect its
operation. A part that is damaged should be properly
repaired or replaced. Contact the Snow Joe
customer service center at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
11. Lighting – Only operate your wood chipper + shredder in
daylight or good artificial light.
Form No. SJ-MTS-EWC15-880E-M
+ Sun Joe
®
®
SAVE THESE INSTRUCTIONS

Advertisement

Table of Contents
loading

Summary of Contents for SNOWJOE Martha Stewart MTS-EWC15

  • Page 1 ® ® 1. Avoid dangerous environments – Do not use the wood customer service center at 1-866-SNOWJOE chipper + shredder in rain or in damp or wet locations. Do (1-866-766-9563) for assistance. not operate the unit in gaseous or explosive atmospheres 11.
  • Page 2: Personal Safety

    12. Do not overreach – Keep proper footing and balance at 10. If the wood chipper + shredder becomes clogged, turn it all times. OFF and disconnect from power supply before clearing debris. Keep the power source clear of debris and other 13.
  • Page 3: Electric Safety

    SJTW-A 14-gauge 50-foot extension cord with lighted safety requirements. To avoid danger, electrical appliances end (Model PJEXT50-B). Visit snowjoe.com to purchase must only be repaired by qualified personnel using original this extension cord online or, to order by phone, call spare parts;...
  • Page 4 Double-Insulated Appliances In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double- insulated appliance requires extreme care and knowledge of the system, and should be performed only by qualified service personnel at an authorized Snow Joe + Sun Joe...
  • Page 5: Safety Symbols

    Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, SAFETY ALERT –...
  • Page 6: Technical Data

    Know Your Electric Wood Chipper + Shredder Read the owner’s manual and safety instructions carefully before operating the electric wood chipper + shredder. Compare the illustration below to the electric wood chipper + shredder in order to become familiar with the location of the various controls and adjustments.
  • Page 7 + Sun Joe customer service center at ® ® 1-866-SNOWJOE (1-866-766-9563). NOTE: Do not discard the shipping carton and packaging material until you are ready to use the electric wood chipper + shredder. The packaging is made of recyclable materials. Properly dispose of these materials in accordance with local regulations or save the packaging for long-term product storage.
  • Page 8: Operation

    Fitting the Paddle Holder and the Paddle Wheel Fig. 5 1. Stand the unit up, and clip the paddle holder to the standing assembly (Fig. 8). Fig. 8 Standing assembly Wheel cover 6. Repeat the steps 2 – 4 to assemble the other wheel. Paddle holder Stand Assembly Fitting 1.
  • Page 9 3. To power the wood chipper + shredder off, push the Fig. 10 removable safety switch to the OFF position. To disable the machine, remove the safety switch completely Hopper (Fig. 13). locking knob Fig. 13 Removable 1. Make sure the removable safety switch is in the OFF safety switch position.
  • Page 10 Overload Protection 2. Use the paddle to push the material inside the hopper if needed (Fig. 15). Your electric wood chipper + shredder is designed with overload protection. If the shredder is clogged during Fig. 15 shredding, the overload protection will cut the power automatically to protect your shredder.
  • Page 11 IMPORTANT: Only use original replacement parts specified for this wood chipper + shredder. You can purchase a replacement blade (Model CJ601E-RBLD) and other genuine replacement parts by ordering online at snowjoe. com or, to order by phone, contact Snow Joe + Sun Joe ®...
  • Page 12: Service & Support

    + Sun Joe customer service center at ® ® 1-866-SNOWJOE (1-866-766-9563). Model + Serial Numbers When contacting the company or reordering parts, you will need to provide the model and serial numbers of your product. These are found on the decal affixed to the housing or handle of your electric wood chipper + shredder.
  • Page 13: Troubleshooting

    • Reverse the blades or replace with new blades. inefficiently Only a company specialist may be able to correct faults that cannot be rectified with the aid of this table. Please call the Snow Joe + Sun Joe customer service center at 1-866-SNOWJOE (1-866-766-9563). ® ®...
  • Page 14 NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at snowjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ®...
  • Page 15 Warranty does not apply to products used for commercial, rental Wearing parts like belts, augers, chains and tines are not covered under this warranty, and can be purchased at snowjoe.com or or re-sale purposes. Should ownership of this machine change by calling 1-866-SNOWJOE (1-866-766-9563).
  • Page 16 snowjoe.com...

Table of Contents