Stihl FSE 60 Instruction Manual page 10

English
WARNING
Avoid dangerous environ -
ments. Do not use the
trimmer in damp or wet
locations. Do not expose
or use in rain. To reduce
the risk of electric shock,
do not handle the plug or
the unit with wet hands.
WARNING
Be sure switch is off when plugging the
unit into the power supply in order to
reduce the risk of fire or electrical shock
from arcing and the risk of injury from
contact with a revolving cutting tool.
WARNING
When using the electric trimmer, always
keep the power supply cord and
extension cord behind you and away
from the cutting tool. Always ensure that
your power cords do not become
entangled with obstacles or objects.
Damaged cords may cause
electrocution. Always disconnect the
plug from the power supply when you
take a break.
WARNING
Avoid damage to the power cords. Keep
cords away from heat, oil and sharp
edges. Never carry trimmer by power
cable or yank power cable or extension
cord to disconnect the plug from the wall
outlet. To unplug, grasp the plug not the
cord.
8
WARNING
Always switch off the motor and make
sure the cutting attachment has stopped
before putting an electric trimmer down.
Disconnect the trimmer from the power
supply when not in use, before servicing,
when changing accessories such as
trimmer line, and the like.
To reduce the risk of unintentional
starting, never carry a plugged in unit
with your finger on the switch. Be sure
the switch is off when plugged in.
Transporting the Electric Trimmer
When transporting your electric trimmer
in a vehicle, properly secure it to prevent
turnover and damage to the electric
trimmer.
Preparation for the Use of the Electric
Trimmer
Adjust hand grip to suit your size before
starting work. The machine should be
properly balanced as specified in your
instruction manual for proper control and
less fatigue in operation. Always check
your electric trimmer for proper condition
and operation before starting,
particularly the power supply cord, plug,
switch, cutting tool and deflector.
WARNING
Inspect the power supply cord plug, and
extension cord before and after each
use for signs of damage or aging.
A
An arrow on the deflector shows the
correct direction of rotation of the cutting
tool.
The cutting tool must be properly
tightened and in safe operating
condition. Inspect for loose parts (nuts,
screws, etc.) and for cracked, bent,
warped or damaged parts.
Follow the instructions in the appropriate
section of this instruction manual when
changing cutting attachments.
15m (50ft)
To reduce the risk of eye and other injury
always wear proper eye protection (see
the chapter on "Proper Clothing") and
ensure that bystanders are at least
50 feet (15 m) away. To reduce the risk
FSE 60