U-Line U-29RW-00A User Manual & Service Manual page 8

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
USER GUIDE
Cutout Dimensions
PREPARE SITE
Cutout & Product Dimensions
Your U-Line product has been designed for either free-
standing or built-in installation. When built-in, your unit
PREPARE SITE
does not require additional air space for top, sides, or
rear. However, the front grille must NOT be obstructed,
Your U-Line product has been designed for either free-
and clearance is required for an electrical connection in
standing or built-in installation. When built-in, your unit
the rear.
does not require additional air space for top, sides, or
rear. However, the front grille must NOT be obstructed, and
clearance is required for an electrical connection in the rear.
CAUTION
!
Unit can NOT be installed behind a closed cabinet CAUTION
!
door.
Unit can NOT be installed behind a closed cabinet
If you would like to align the face of the unit
door.
with other adjacent cabinet doors, you may need
to alter the wall just behind the drain connection
on the unit to accommodate the drain.
CUTOUT DIMENSIONS
CUTOUT DIMENSIONS
See Electrical
Height
34-1/4"
(870 mm)
35-1/8"
(892 mm)
Height
28-5/8"
(727 mm)
28-7/8"
(733 mm)
PRODUCT DIMENSIONS
NOTICE
It is extremely important that this unit sits on a
REAR
level surface, as it does not have feet levelers. If
it is not level, the ice mold will not fill evenly.
1 ⁄ "
(38mm)
2"
(51mm)
Cutout & Product Dimensions
5/8"
7"
(16 mm)
(178 mm)
4"
(102 mm)
21-1/16"
(535 mm)
3 ⁄ "
(95mm)
3 ⁄ "
(84mm)
FRONT
TOP
24"
(610 mm)
Minimum
SIDE
8
20 ⁄ "
(529mm)
4 ⁄ "
(117mm)
17 ⁄ "
(451mm)
⁄ "
(19mm)
22 ⁄ "
(583mm)
20 ⁄ "
(521mm)
20 ⁄ "
(527mm)
14 ⁄ "
(376mm)
⁄ "
(19mm)
28 ⁄ "
(529mm)
20 ⁄ "
(519mm)
22 ⁄ "
(568mm)
23 ⁄ "
(602mm)
15 ⁄ "
(392mm)
Cutout Dimensions 1